Revert "feat: DEL in place of PGDN among the terminal's extra keys"

This reverts commit cf855fdc23.

README.md

@@ -1,4 +1,4 @@
-# LPRA — LongPolling Remote Access
+# LPRA - LongPolling Remote Access
 
 Лёгкий self-hosted сервис для доступа к Linux-машинам **без белого IP** (за NAT).
 Агент на клиенте сам исходяще подключается к серверу по HTTP long-polling; админ
@@ -11,9 +11,9 @@
 ```
 
 ## Компоненты
-- **Сервер** (`cmd/server`) — админ-панель + точка встречи для агентов. За nginx (TLS).
-- **Агент** (`cmd/agent`) — Linux-бинарь, systemd-сервис от root, PTY по запросу.
-- **install.sh** — интерактивный установщик, отдаётся сервером как статика.
+- **Сервер** (`cmd/server`) - админ-панель + точка встречи для агентов. За nginx (TLS).
+- **Агент** (`cmd/agent`) - Linux-бинарь, systemd-сервис от root, PTY по запросу.
+- **install.sh** - интерактивный установщик, отдаётся сервером как статика.
 
 ## Сборка
 ```sh
@@ -28,7 +28,7 @@
 Поставьте перед ним nginx по `deploy/nginx.conf.example` (TLS, long-poll/WS).
 Локально без TLS можно добавить `-insecure-cookies`.
 
-Первый запуск: откройте `/setup` — мастер создаст администратора. Дальше `/settings`:
+Первый запуск: откройте `/setup` - мастер создаст администратора. Дальше `/settings`:
 адрес хоста (по умолчанию `https://localhost:8445`), enroll-секрет и готовая
 команда установки.
 
@@ -37,19 +37,36 @@
 ```sh
 curl -fsSL https://localhost:8445/install.sh | sudo HOST=https://localhost:8445 ENROLL_SECRET=<секрет> sh
 ```
-Или интерактивно (спросит секрет, а если агент уже стоит — предложит удалить):
+Или интерактивно (спросит секрет, а если агент уже стоит - предложит удалить):
 ```sh
 curl -fsSL https://localhost:8445/install.sh | sudo sh
 ```
 
+## Проброс портов и прямой туннель
+Правила проброса создаются на странице машины. Режим `http` идёт через адрес панели (long-poll),
+режимы `tcp`/`udp` - через прямой туннель: агент держит исходящее соединение к порту туннеля хоста
+(флаг `-tunnel` / `LPRA_TUNNEL_ADDR`).
+
+Порт туннеля и хост, к которому для него подключаются агенты (например, IP вместо домена панели),
+меняются в `/settings` → «Прямой туннель». Агенты забирают адрес с панели сами - при подключении и
+при каждом опросе, переустановка не нужна. Локальные `TUNNEL_ADDR` / `TUNNEL_PORT` в окружении агента
+имеют приоритет над настройкой панели (`TUNNEL_ADDR=off` отключает туннель).
+
+Если на хосте активен ufw и сервер запущен от root, панель сама открывает порт хоста правила
+(tcp для `http`/`tcp`, udp для `udp`) и порт туннеля для прямых режимов, а при удалении правила - закрывает.
+При `ProtectSystem=strict` в systemd-юните ufw нужны права на запись: `ReadWritePaths=/etc/ufw /run`.
+
+## Версия
+Версия задаётся в одном месте - `VERSION.txt`; файл вшивается в сервер и агент при сборке.
+
 ## Пользователь терминала
-По умолчанию терминал открывается от пользователя, под которым запущен агент (на Linux — root).
+По умолчанию терминал открывается от пользователя, под которым запущен агент (на Linux - root).
 В окне «Изменить машину» можно выбрать другого пользователя машины или создать нового
-(имя, пароль, опционально — добавить в sudo). Смена и создание работают, только если агент запущен от root.
+(имя, пароль, опционально - добавить в sudo). Смена и создание работают, только если агент запущен от root.
 Файловый менеджер по-прежнему работает от пользователя агента.
 
 ## Безопасность
-- Пароли админов — bcrypt; сессии в HttpOnly/Secure/SameSite куках; CSRF на формах; rate-limit логина.
+- Пароли админов - bcrypt; сессии в HttpOnly/Secure/SameSite куках; CSRF на формах; rate-limit логина.
 - Агенты: общий enroll-секрет → индивидуальный токен (хранится хешем, сверка constant-time).
 - Открытие терминала пишется в таблицу `audit` (терминал даёт root-доступ), как и смена/создание пользователя.
 

VERSION.txt

@@ -1 +1 @@
-0.0.2
+0.0.6

build.sh

@@ -5,10 +5,9 @@ set -eu
 
 cd "$(dirname "$0")"
 
-VERSION="${VERSION:-$(cat VERSION.txt 2>/dev/null || echo 0.0.0)}"
-PKG="github.com/x-grk/longpolling-remote-access"
-LDFLAGS="-s -w -X $PKG/internal/server.Version=$VERSION -X $PKG/internal/agent.Version=$VERSION"
-echo ">> version $VERSION"
+# The version comes from VERSION.txt, which is embedded into every binary.
+LDFLAGS="-s -w"
+echo ">> version $(cat VERSION.txt)"
 
 mkdir -p dist bin
 

cmd/agent/main.go

@@ -10,9 +10,11 @@ import (
 	"net/url"
 	"os"
 	"os/signal"
+	"strconv"
 	"syscall"
 
 	"github.com/x-grk/longpolling-remote-access/internal/agent"
+	"github.com/x-grk/longpolling-remote-access/internal/tunnel"
 )
 
 func main() {
@@ -23,6 +25,8 @@ func main() {
 		Name:         os.Getenv("AGENT_NAME"),
 		StatePath:    envOr("STATE_PATH", "/etc/lpagent/state.json"),
 		TunnelAddr:   tunnelAddr(host),
+		// A locally set address wins over the one from the panel settings.
+		TunnelPinned: os.Getenv("TUNNEL_ADDR") != "" || os.Getenv("TUNNEL_PORT") != "",
 	}
 	if cfg.EnrollSecret == "" {
 		// Only required for the very first run (before enrollment).
@@ -46,9 +50,10 @@ func envOr(key, def string) string {
 	return def
 }
 
-// tunnelAddr derives the direct-tunnel address (host:8446) from the server URL.
-// TUNNEL_ADDR overrides it entirely; TUNNEL_PORT overrides just the port.
-// Set TUNNEL_ADDR=off to disable the direct tunnel.
+// tunnelAddr derives the direct-tunnel address (host:port) from the server URL.
+// It is only the starting point: the agent follows the host and port set in
+// the panel settings, unless TUNNEL_ADDR (the whole address) or TUNNEL_PORT
+// (just the port) pins it here. Set TUNNEL_ADDR=off to disable the tunnel.
 func tunnelAddr(hostURL string) string {
 	if v := os.Getenv("TUNNEL_ADDR"); v != "" {
 		if v == "off" {
@@ -60,5 +65,5 @@ func tunnelAddr(hostURL string) string {
 	if err != nil || u.Hostname() == "" {
 		return ""
 	}
-	return net.JoinHostPort(u.Hostname(), envOr("TUNNEL_PORT", "8446"))
+	return net.JoinHostPort(u.Hostname(), envOr("TUNNEL_PORT", strconv.Itoa(tunnel.DefaultPort)))
 }

cmd/server/main.go

@@ -10,16 +10,18 @@ import (
 	"log"
 	"net/http"
 	"os"
+	"strconv"
 	"time"
 
 	"github.com/x-grk/longpolling-remote-access/internal/server"
+	"github.com/x-grk/longpolling-remote-access/internal/tunnel"
 )
 
 func main() {
 	addr := flag.String("addr", envOr("LPRA_ADDR", "127.0.0.1:8091"), "listen address (behind nginx)")
 	dbPath := flag.String("db", envOr("LPRA_DB", "lpra.db"), "path to SQLite database")
 	distDir := flag.String("dist", envOr("LPRA_DIST", "dist"), "directory with agent binaries served at /download/")
-	tunnelAddr := flag.String("tunnel", envOr("LPRA_TUNNEL_ADDR", ":8446"), "listen address for the direct TCP+UDP forward tunnel (empty disables)")
+	tunnelAddr := flag.String("tunnel", envOr("LPRA_TUNNEL_ADDR", ":"+strconv.Itoa(tunnel.DefaultPort)), "listen address for the direct TCP+UDP forward tunnel (empty disables)")
 	insecureCookies := flag.Bool("insecure-cookies", envOr("LPRA_INSECURE_COOKIES", "") == "1",
 		"do not mark cookies Secure (plain-HTTP local testing only)")
 	flag.Parse()

deploy/lpra-server.service

@@ -1,24 +1,24 @@
 # systemd unit for the LPRA host (server).
 #
-# Unlike the agent, the server does NOT need root: it listens on a high local
-# port (127.0.0.1:8091) behind nginx, so run it as an unprivileged user.
+# The server runs as root so that the panel can open forwarded ports in ufw;
+# it listens on a high local port (127.0.0.1:8091) behind nginx.
 #
 # Install:
-#   sudo useradd --system --home /opt/lpra --shell /usr/sbin/nologin lpra
-#   sudo mkdir -p /opt/lpra /var/lib/lpra
+#   sudo mkdir -p /opt/lpra
 #   sudo cp bin/lpra-server /opt/lpra/
 #   sudo cp -r dist /opt/lpra/dist           # agent binaries served at /download/
-#   sudo chown -R lpra:lpra /opt/lpra /var/lib/lpra
 #   sudo cp deploy/lpra-server.service /etc/systemd/system/
 #   sudo systemctl daemon-reload && sudo systemctl enable --now lpra-server
 #
-# Config overrides can go in /etc/lpra-server.env (see EnvironmentFile below),
-# e.g.  LPRA_ADDR=127.0.0.1:8091
+# Direct port forwarding (tcp/udp modes) uses the tunnel port on the host, which
+# has to be open in the firewall for tcp and udp. (The "http" forward mode and
+# terminal/files go through nginx :8445 and need nothing extra.) Set the tunnel
+# address with LPRA_TUNNEL_ADDR, or set it empty to disable.
+# The port, and the host agents dial for it, can also be changed in the panel
+# settings; agents pick the new address up from the panel by themselves.
 #
-# Direct port forwarding (tcp/udp modes) uses port 8446 on the host — open it in
-# the firewall:  ufw allow 8446/tcp ; ufw allow 8446/udp
-# (The "http" forward mode and terminal/files go through nginx :8445 and need
-# nothing extra.) Override with LPRA_TUNNEL_ADDR, or set it empty to disable.
+# ufw integration (the panel opening forwarded ports itself) needs root and a
+# writable /etc/ufw and /run - see ReadWritePaths below.
 
 [Unit]
 Description=LPRA remote access host (admin panel + agent rendezvous)
@@ -26,17 +26,11 @@ After=network-online.target
 Wants=network-online.target
 
 [Service]
-Type=simple
-User=lpra
-Group=lpra
 WorkingDirectory=/opt/lpra
 
-# Optional environment overrides; "-" means the file is not required.
-EnvironmentFile=-/etc/lpra-server.env
-
 ExecStart=/opt/lpra/lpra-server \
     -addr 127.0.0.1:8091 \
-    -db /var/lib/lpra/lpra.db \
+    -db /opt/lpra/lpra.db \
     -dist /opt/lpra/dist
 
 Restart=always
@@ -51,8 +45,11 @@ PrivateDevices=true
 ProtectKernelTunables=true
 ProtectControlGroups=true
 RestrictSUIDSGID=true
-# The server only needs to write its SQLite database here.
-ReadWritePaths=/var/lib/lpra
+# The SQLite database, plus what ufw writes: its rules in /etc/ufw and the
+# ufw/xtables locks in /run. Without the last two "ufw status" works but
+# "ufw allow" fails with "'/etc/ufw/user.rules' is not writable".
+ReadWritePaths=/opt/lpra /etc/ufw /run
+ReadWritePaths-=/etc/ufw /run
 
 [Install]
 WantedBy=multi-user.target

deploy/nginx.conf.example

@@ -36,6 +36,9 @@ server {
         # Long-poll behaviour: no buffering, generous read timeout.
         proxy_buffering     off;
         proxy_cache         off;
+        # Pass uploads on as they arrive: the speed test through the browser
+        # times them on the client.
+        proxy_request_buffering off;
         proxy_read_timeout  120s;
         proxy_send_timeout  120s;
     }

go.mod

@@ -5,6 +5,7 @@ go 1.26
 require (
 	github.com/creack/pty v1.1.21
 	golang.org/x/crypto v0.31.0
+	golang.org/x/sys v0.28.0
 	modernc.org/sqlite v1.24.0
 )
 
@@ -13,7 +14,6 @@ require (
 	github.com/google/uuid v1.6.0 // indirect
 	github.com/mattn/go-isatty v0.0.16 // indirect
 	github.com/remyoudompheng/bigfft v0.0.0-20230129092748-24d4a6f8daec // indirect
-	golang.org/x/sys v0.28.0 // indirect
 	modernc.org/libc v1.22.5 // indirect
 	modernc.org/mathutil v1.5.0 // indirect
 	modernc.org/memory v1.5.0 // indirect

internal/agent/client.go

@@ -13,17 +13,19 @@ import (
 	"log"
 	"net"
 	"net/http"
+	"net/url"
 	"os"
 	"path/filepath"
 	"runtime"
+	"sync"
 	"time"
 
+	lpra "github.com/x-grk/longpolling-remote-access"
 	"github.com/x-grk/longpolling-remote-access/internal/proto"
 )
 
-// Version is the agent build version, injected at compile time via -ldflags
-// (-X .../internal/agent.Version=...).
-var Version = "dev"
+// Version is the agent build version (see VERSION.txt).
+var Version = lpra.Version
 
 // Config is the agent's runtime configuration (from env / config.env).
 type Config struct {
@@ -31,7 +33,10 @@ type Config struct {
 	EnrollSecret string
 	Name         string // optional friendly name
 	StatePath    string // where the enrolled id+token are persisted
-	TunnelAddr   string // host:port for the direct forward tunnel (e.g. REDACTED:8446); empty disables
+	TunnelAddr   string // host:port for the direct forward tunnel (e.g. panel.example:port); empty disables
+	// TunnelPinned keeps TunnelAddr as configured locally (TUNNEL_ADDR /
+	// TUNNEL_PORT) instead of following the address set in the panel.
+	TunnelPinned bool
 }
 
 type state struct {
@@ -45,6 +50,11 @@ type Agent struct {
 	http      *http.Client
 	state     state
 	pollCount int
+
+	// Direct tunnel currently running (see setTunnelAddr).
+	tunMu     sync.Mutex
+	tunAddr   string
+	tunCancel context.CancelFunc
 }
 
 // New builds an agent. It does not perform any network I/O.
@@ -87,10 +97,11 @@ func (a *Agent) Run(ctx context.Context) error {
 	}
 	log.Printf("agent %s connected to %s", a.state.AgentID, a.cfg.Host)
 
-	// Direct forward tunnel (low-latency TCP mux + UDP) on 8446, if configured.
-	if a.cfg.TunnelAddr != "" {
-		go a.runTunnel(ctx)
-		go a.runUDP(ctx)
+	// Direct forward tunnel (low-latency TCP mux + UDP). Its address comes
+	// from the panel; fall back to the configured one when the server sends
+	// none (tunnel port left at the default on an older server).
+	if a.cfg.TunnelPinned || !a.fetchConfig(ctx) {
+		a.setTunnelAddr(ctx, a.cfg.TunnelAddr)
 	}
 
 	backoff := time.Second
@@ -168,6 +179,7 @@ func (a *Agent) pollOnce(ctx context.Context) error {
 	if err := json.NewDecoder(resp.Body).Decode(&msg); err != nil {
 		return err
 	}
+	a.applyTunnelHeader(ctx, resp.Header)
 	// Dispatch in the background so we keep polling for more work.
 	switch msg.Type {
 	case proto.CtrlOpenTerminal:
@@ -180,6 +192,66 @@ func (a *Agent) pollOnce(ctx context.Context) error {
 	return nil
 }
 
+// fetchConfig asks the server for the settings it hands to agents and reports
+// whether it named a tunnel address.
+func (a *Agent) fetchConfig(ctx context.Context) bool {
+	ctx2, cancel := context.WithTimeout(ctx, 10*time.Second)
+	defer cancel()
+	req, _ := http.NewRequestWithContext(ctx2, http.MethodGet, a.cfg.Host+"/api/agent/config", nil)
+	a.authHeaders(req)
+	resp, err := a.http.Do(req)
+	if err != nil {
+		return false
+	}
+	defer resp.Body.Close()
+	return a.applyTunnelHeader(ctx, resp.Header)
+}
+
+// applyTunnelHeader follows the tunnel address the server advertises as
+// "host:port"; an empty host means the host we already reach the server on.
+func (a *Agent) applyTunnelHeader(ctx context.Context, h http.Header) bool {
+	v := h.Get("X-Tunnel-Addr")
+	if v == "" || a.cfg.TunnelPinned {
+		return false
+	}
+	host, port, err := net.SplitHostPort(v)
+	if err != nil {
+		return false
+	}
+	if host == "" {
+		u, err := url.Parse(a.cfg.Host)
+		if err != nil || u.Hostname() == "" {
+			return false
+		}
+		host = u.Hostname()
+	}
+	a.setTunnelAddr(ctx, net.JoinHostPort(host, port))
+	return true
+}
+
+// setTunnelAddr points the direct tunnel at addr, restarting it if it was
+// running against another address. An empty addr stops it.
+func (a *Agent) setTunnelAddr(ctx context.Context, addr string) {
+	a.tunMu.Lock()
+	defer a.tunMu.Unlock()
+	if addr == a.tunAddr {
+		return
+	}
+	if a.tunCancel != nil {
+		a.tunCancel()
+		a.tunCancel = nil
+	}
+	a.tunAddr = addr
+	if addr == "" {
+		return
+	}
+	log.Printf("tunnel: using %s", addr)
+	tctx, cancel := context.WithCancel(ctx)
+	a.tunCancel = cancel
+	go a.runTunnel(tctx, addr)
+	go a.runUDP(tctx, addr)
+}
+
 func (a *Agent) authHeaders(req *http.Request) {
 	req.Header.Set("X-Agent-Id", a.state.AgentID)
 	req.Header.Set("Authorization", "Bearer "+a.state.Token)

internal/agent/fs.go

@@ -9,7 +9,9 @@ import (
 	"io"
 	"os"
 	"os/exec"
+	"os/user"
 	"path/filepath"
+	"runtime"
 	"sort"
 	"strings"
 	"unicode/utf8"
@@ -17,8 +19,8 @@ import (
 	"github.com/x-grk/longpolling-remote-access/internal/proto"
 )
 
-// fsReadCap bounds how many bytes a view/read returns (5 MiB).
-const fsReadCap = 5 * 1024 * 1024
+// fsReadCap bounds how many bytes a view/read returns.
+const fsReadCap = proto.FSReadCap
 
 // fsDownloadCap bounds a browser download (kept under the 64 MiB result/body
 // limit once base64-encoded).
@@ -79,8 +81,18 @@ func fsList(path string) (proto.FSListResult, error) {
 	if path == "" {
 		path = "/"
 	}
+	// "~" / "~name" is where the file manager starts: the home directory, or
+	// the root when there is none to open.
+	home := strings.HasPrefix(path, "~") && !strings.Contains(path, "/")
+	if home {
+		path = homeDir(path[1:])
+	}
 	abs, _ := filepath.Abs(path)
 	entries, err := os.ReadDir(abs)
+	if err != nil && home && abs != "/" {
+		abs = "/"
+		entries, err = os.ReadDir(abs)
+	}
 	if err != nil {
 		return proto.FSListResult{}, err
 	}
@@ -222,3 +234,30 @@ func fsZip(paths []string, dest string) (any, error) {
 	}
 	return map[string]string{"dest": dest}, nil
 }
+
+// homeDir returns the home directory of the named user ("" = the user the
+// agent runs as), or "/" when it cannot be told.
+func homeDir(name string) string {
+	if name != "" {
+		if validUserName(name) {
+			if u, err := user.Lookup(name); err == nil && u.HomeDir != "" {
+				return u.HomeDir
+			}
+		}
+		return "/"
+	}
+	if u, err := user.Current(); err == nil && u.HomeDir != "" {
+		return u.HomeDir
+	}
+	if h := os.Getenv("HOME"); h != "" {
+		return h
+	}
+	// A root service often has neither a passwd entry we can read nor $HOME.
+	if os.Geteuid() == 0 {
+		if runtime.GOOS == "darwin" {
+			return "/var/root"
+		}
+		return "/root"
+	}
+	return "/"
+}

internal/agent/speed.go

@@ -0,0 +1,167 @@
+package agent
+
+import (
+	"context"
+	"crypto/rand"
+	"encoding/json"
+	"errors"
+	"io"
+	"net/http"
+	"time"
+
+	"github.com/x-grk/longpolling-remote-access/internal/proto"
+)
+
+const (
+	// speedWindow is how long each direction is measured for, unless the
+	// server asks for another window; speedWindowMax bounds what it may ask.
+	speedWindow    = 3 * time.Second
+	speedWindowMax = 30 * time.Second
+	// speedWait is how long the download may take to start: in a relayed test
+	// its bytes come from the browser.
+	speedWait = 10 * time.Second
+	// speedUpCap bounds the upload, whatever the link does in the window.
+	speedUpCap = 48 << 20
+)
+
+// doSpeed measures the agent's HTTP link to the server: round-trip time of an
+// empty request, then how much flows each way in the window. In a relayed
+// test the server pipes both streams to the browser, so they run end to end.
+func (a *Agent) doSpeed(ctx context.Context, env proto.TaskEnvelope) proto.TaskResult {
+	var args proto.SysSpeedArgs
+	if len(env.Args) > 0 {
+		_ = json.Unmarshal(env.Args, &args)
+	}
+	window := speedWindow
+	if args.WindowMs > 0 {
+		window = min(time.Duration(args.WindowMs)*time.Millisecond, speedWindowMax)
+	}
+	res, err := a.measureSpeed(ctx, args.Relay, window)
+	if err != nil {
+		return proto.TaskResult{Error: err.Error()}
+	}
+	data, _ := json.Marshal(res)
+	return proto.TaskResult{OK: true, Data: data}
+}
+
+func (a *Agent) measureSpeed(ctx context.Context, relay bool, window time.Duration) (proto.SysSpeedResult, error) {
+	res := proto.SysSpeedResult{Relay: relay}
+	streams := "/api/agent/speed"
+	if relay {
+		streams += "/relay"
+	}
+	// Ping: the first request may pay for a new connection, so keep the best.
+	for i := 0; i < 4; i++ {
+		start := time.Now()
+		resp, err := a.speedRequest(ctx, http.MethodGet, "/api/agent/speed/down?bytes=0", nil)
+		if err != nil {
+			return res, err
+		}
+		io.Copy(io.Discard, resp.Body)
+		resp.Body.Close()
+		ms := float64(time.Since(start).Microseconds()) / 1000
+		if i == 0 || ms < res.PingMs {
+			res.PingMs = ms
+		}
+	}
+
+	down, err := a.speedDown(ctx, streams+"/down", window)
+	if err != nil {
+		return res, err
+	}
+	res.DownBps = down
+
+	// Up: send until the window closes or the cap is hit.
+	body := &speedSource{deadline: time.Now().Add(window), left: speedUpCap}
+	start := time.Now()
+	resp, err := a.speedRequest(ctx, http.MethodPost, streams+"/up", body)
+	if err != nil {
+		return res, err
+	}
+	io.Copy(io.Discard, resp.Body)
+	resp.Body.Close()
+	res.UpBps = bps(int64(speedUpCap-body.left), time.Since(start))
+	return res, nil
+}
+
+// speedDown reads what the server streams for the window, counted from the
+// first byte, and returns the rate.
+func (a *Agent) speedDown(ctx context.Context, path string, window time.Duration) (float64, error) {
+	ctx, cancel := context.WithCancel(ctx)
+	defer cancel()
+	t := time.AfterFunc(speedWait, cancel)
+	defer t.Stop()
+	resp, err := a.speedRequest(ctx, http.MethodGet, path, nil)
+	if err != nil {
+		return 0, err
+	}
+	defer resp.Body.Close()
+	var (
+		n     int64
+		start time.Time
+		buf   = make([]byte, 64<<10)
+	)
+	for {
+		k, err := resp.Body.Read(buf)
+		if k > 0 && start.IsZero() {
+			start = time.Now()
+			t.Reset(window)
+		}
+		n += int64(k)
+		if err != nil {
+			break
+		}
+	}
+	if start.IsZero() {
+		return 0, errors.New("нет данных для замера")
+	}
+	return bps(n, time.Since(start)), nil
+}
+
+func (a *Agent) speedRequest(ctx context.Context, method, path string, body io.Reader) (*http.Response, error) {
+	req, err := http.NewRequestWithContext(ctx, method, a.cfg.Host+path, body)
+	if err != nil {
+		return nil, err
+	}
+	a.authHeaders(req)
+	resp, err := a.http.Do(req)
+	if err != nil {
+		return nil, err
+	}
+	if resp.StatusCode != http.StatusOK && resp.StatusCode != http.StatusNoContent {
+		resp.Body.Close()
+		return nil, errStatus(resp.StatusCode)
+	}
+	return resp, nil
+}
+
+func bps(n int64, d time.Duration) float64 {
+	if d <= 0 {
+		return 0
+	}
+	return float64(n) * 8 / d.Seconds()
+}
+
+// speedSource is an upload body of incompressible bytes that ends at the
+// deadline or after `left` bytes.
+type speedSource struct {
+	deadline time.Time
+	left     int
+	block    []byte
+}
+
+func (s *speedSource) Read(p []byte) (int, error) {
+	if s.left <= 0 || !time.Now().Before(s.deadline) {
+		return 0, io.EOF
+	}
+	if s.block == nil {
+		s.block = make([]byte, 64<<10)
+		rand.Read(s.block)
+	}
+	n := copy(p, s.block)
+	if n > s.left {
+		n = s.left
+	}
+	s.left -= n
+	return n, nil
+}

internal/agent/stat.go

@@ -0,0 +1,45 @@
+package agent
+
+import (
+	"runtime"
+	"sync"
+	"syscall"
+
+	"github.com/x-grk/longpolling-remote-access/internal/proto"
+)
+
+// statMu serializes samples: the CPU figure is a delta against the last one.
+var statMu sync.Mutex
+
+// sysStat samples the machine's load. It costs nothing while nobody asks: the
+// panel requests it only for an open status page.
+func sysStat() (proto.SysStatResult, error) {
+	statMu.Lock()
+	defer statMu.Unlock()
+	res := proto.SysStatResult{NCPU: runtime.NumCPU()}
+	cpu, err := cpuPercent()
+	if err != nil {
+		return res, err
+	}
+	res.CPU = cpu
+	if res.MemTotal, res.MemUsed, err = memUsage(); err != nil {
+		return res, err
+	}
+	var fs syscall.Statfs_t
+	if err := syscall.Statfs("/", &fs); err != nil {
+		return res, err
+	}
+	res.DiskTotal = uint64(fs.Blocks) * uint64(fs.Bsize)
+	res.DiskFree = uint64(fs.Bavail) * uint64(fs.Bsize)
+	return res, nil
+}
+
+func clampPercent(v float64) float64 {
+	if v < 0 {
+		return 0
+	}
+	if v > 100 {
+		return 100
+	}
+	return v
+}

internal/agent/stat_darwin.go

@@ -0,0 +1,43 @@
+package agent
+
+import (
+	"bytes"
+	"os/exec"
+	"runtime"
+	"strconv"
+
+	"golang.org/x/sys/unix"
+)
+
+// cpuPercent sums the per-process CPU shares ps reports. macOS exposes the
+// host CPU ticks only through Mach calls, which need cgo.
+func cpuPercent() (float64, error) {
+	out, err := exec.Command("/bin/ps", "-A", "-o", "%cpu=").Output()
+	if err != nil {
+		return 0, err
+	}
+	var sum float64
+	for _, f := range bytes.Fields(out) {
+		// Some locales print a decimal comma.
+		v, _ := strconv.ParseFloat(string(bytes.Replace(f, []byte(","), []byte("."), 1)), 64)
+		sum += v
+	}
+	return clampPercent(sum / float64(runtime.NumCPU())), nil
+}
+
+// memUsage takes the kernel's own share of memory still available
+// (kern.memorystatus_level, what `memory_pressure` prints).
+func memUsage() (total, used uint64, err error) {
+	total, err = unix.SysctlUint64("hw.memsize")
+	if err != nil {
+		return 0, 0, err
+	}
+	level, err := unix.SysctlUint32("kern.memorystatus_level")
+	if err != nil {
+		return 0, 0, err
+	}
+	if level > 100 {
+		level = 100
+	}
+	return total, total / 100 * uint64(100-level), nil
+}

internal/agent/stat_linux.go

@@ -0,0 +1,121 @@
+package agent
+
+import (
+	"bytes"
+	"errors"
+	"os"
+	"strconv"
+	"time"
+)
+
+// Previous /proc/stat reading; the load is the busy share of the ticks since.
+var (
+	cpuPrevIdle, cpuPrevTotal uint64
+	cpuPrevAt                 time.Time
+)
+
+// cpuStaleAfter is how old the previous reading may be: past it the delta
+// would average over a stretch nobody was watching, so take a fresh pair.
+const cpuStaleAfter = 15 * time.Second
+
+func cpuPercent() (float64, error) {
+	if time.Since(cpuPrevAt) > cpuStaleAfter {
+		idle, total, err := readCPUTicks()
+		if err != nil {
+			return 0, err
+		}
+		cpuPrevIdle, cpuPrevTotal = idle, total
+		time.Sleep(200 * time.Millisecond)
+	}
+	idle, total, err := readCPUTicks()
+	if err != nil {
+		return 0, err
+	}
+	dIdle, dTotal := idle-cpuPrevIdle, total-cpuPrevTotal
+	cpuPrevIdle, cpuPrevTotal, cpuPrevAt = idle, total, time.Now()
+	if dTotal == 0 || dIdle > dTotal {
+		return 0, nil
+	}
+	return clampPercent(100 * float64(dTotal-dIdle) / float64(dTotal)), nil
+}
+
+// readCPUTicks parses the aggregate "cpu" line of /proc/stat:
+// user nice system idle iowait irq softirq steal ...
+func readCPUTicks() (idle, total uint64, err error) {
+	var buf [512]byte
+	f, err := os.Open("/proc/stat")
+	if err != nil {
+		return 0, 0, err
+	}
+	n, _ := f.Read(buf[:])
+	f.Close()
+	line := buf[:n]
+	if i := bytes.IndexByte(line, '\n'); i >= 0 {
+		line = line[:i]
+	}
+	fields := bytes.Fields(line)
+	if len(fields) < 5 || string(fields[0]) != "cpu" {
+		return 0, 0, errors.New("unexpected /proc/stat")
+	}
+	for i, f := range fields[1:] {
+		if i >= 8 { // guest time is already counted in user/nice
+			break
+		}
+		v, _ := strconv.ParseUint(string(f), 10, 64)
+		total += v
+		if i == 3 || i == 4 { // idle, iowait
+			idle += v
+		}
+	}
+	return idle, total, nil
+}
+
+// memUsage reads /proc/meminfo; used is everything not available to new
+// processes (so page cache does not count as used).
+func memUsage() (total, used uint64, err error) {
+	data, err := os.ReadFile("/proc/meminfo")
+	if err != nil {
+		return 0, 0, err
+	}
+	var avail, free uint64
+	var haveAvail bool
+	for len(data) > 0 {
+		line := data
+		if i := bytes.IndexByte(data, '\n'); i >= 0 {
+			line, data = data[:i], data[i+1:]
+		} else {
+			data = nil
+		}
+		switch {
+		case bytes.HasPrefix(line, []byte("MemTotal:")):
+			total = meminfoKB(line)
+		case bytes.HasPrefix(line, []byte("MemFree:")):
+			free = meminfoKB(line)
+		case bytes.HasPrefix(line, []byte("MemAvailable:")):
+			avail, haveAvail = meminfoKB(line), true
+		}
+		if haveAvail && total > 0 {
+			break
+		}
+	}
+	if total == 0 {
+		return 0, 0, errors.New("unexpected /proc/meminfo")
+	}
+	if !haveAvail {
+		avail = free
+	}
+	if avail > total {
+		avail = total
+	}
+	return total, total - avail, nil
+}
+
+// meminfoKB returns the value of a "Key:   123 kB" line in bytes.
+func meminfoKB(line []byte) uint64 {
+	f := bytes.Fields(line)
+	if len(f) < 2 {
+		return 0
+	}
+	v, _ := strconv.ParseUint(string(f[1]), 10, 64)
+	return v * 1024
+}

internal/agent/task.go

@@ -17,9 +17,12 @@ func (a *Agent) runTask(ctx context.Context, taskID string) {
 		return
 	}
 	var res proto.TaskResult
-	if env.Type == proto.TaskSysUpdate {
+	switch env.Type {
+	case proto.TaskSysUpdate:
 		res = a.doUpdate()
-	} else {
+	case proto.TaskSysSpeed:
+		res = a.doSpeed(ctx, env)
+	default:
 		res = a.execTask(env)
 	}
 	a.postResult(ctx, taskID, res)

internal/agent/terminal.go

@@ -15,7 +15,7 @@ type PTY struct {
 }
 
 // StartPTY launches a login shell attached to a new PTY. With user empty (or
-// equal to the agent's own user) it is the agent's shell — root by default,
+// equal to the agent's own user) it is the agent's shell - root by default,
 // since the agent runs as a root systemd service. Any other user is entered via
 // `su -l`, which only a root agent can do without a password.
 func StartPTY(user string) (*PTY, error) {

internal/agent/tunnel.go

@@ -15,12 +15,12 @@ import (
 
 // --- direct TCP mux tunnel ---
 
-// runTunnel keeps a persistent connection to the host's 8446 tunnel, dialing
-// client-side ports on demand for "tcp" forward rules.
-func (a *Agent) runTunnel(ctx context.Context) {
+// runTunnel keeps a persistent connection to the host's tunnel at addr, dialing
+// client-side ports on demand for "tcp" forward rules, until ctx is cancelled.
+func (a *Agent) runTunnel(ctx context.Context, addr string) {
 	backoff := time.Second
 	for ctx.Err() == nil {
-		if err := a.tunnelOnce(ctx); err != nil {
+		if err := a.tunnelOnce(ctx, addr); err != nil {
 			select {
 			case <-time.After(backoff):
 			case <-ctx.Done():
@@ -35,13 +35,15 @@ func (a *Agent) runTunnel(ctx context.Context) {
 	}
 }
 
-func (a *Agent) tunnelOnce(ctx context.Context) error {
+func (a *Agent) tunnelOnce(ctx context.Context, addr string) error {
 	d := net.Dialer{Timeout: 10 * time.Second}
-	conn, err := d.DialContext(ctx, "tcp", a.cfg.TunnelAddr)
+	conn, err := d.DialContext(ctx, "tcp", addr)
 	if err != nil {
 		return err
 	}
 	defer conn.Close()
+	// Unblock the read loop when the tunnel is stopped or moved.
+	defer context.AfterFunc(ctx, func() { conn.Close() })()
 	if tc, ok := conn.(*net.TCPConn); ok {
 		_ = tc.SetNoDelay(true)
 	}
@@ -65,7 +67,7 @@ func (a *Agent) tunnelOnce(ctx context.Context) error {
 		return err
 	}
 	_ = conn.SetDeadline(time.Time{})
-	log.Printf("tunnel: connected to %s", a.cfg.TunnelAddr)
+	log.Printf("tunnel: connected to %s", addr)
 
 	tc := &tunClient{conn: conn, streams: map[uint32]*agentStream{}}
 	return tc.readLoop()
@@ -194,12 +196,12 @@ func (t *tunClient) shutdown() {
 
 // --- direct UDP forwarding ---
 
-// runUDP maintains the agent's UDP endpoint on the host's 8446 channel and
+// runUDP maintains the agent's UDP endpoint on the host's tunnel at addr and
 // relays datagrams to/from client-side UDP ports for "udp" forward rules.
-func (a *Agent) runUDP(ctx context.Context) {
+func (a *Agent) runUDP(ctx context.Context, addr string) {
 	backoff := time.Second
 	for ctx.Err() == nil {
-		if err := a.udpOnce(ctx); err != nil {
+		if err := a.udpOnce(ctx, addr); err != nil {
 			select {
 			case <-time.After(backoff):
 			case <-ctx.Done():
@@ -214,8 +216,8 @@ func (a *Agent) runUDP(ctx context.Context) {
 	}
 }
 
-func (a *Agent) udpOnce(ctx context.Context) error {
-	raddr, err := net.ResolveUDPAddr("udp", a.cfg.TunnelAddr)
+func (a *Agent) udpOnce(ctx context.Context, addr string) error {
+	raddr, err := net.ResolveUDPAddr("udp", addr)
 	if err != nil {
 		return err
 	}
@@ -224,6 +226,8 @@ func (a *Agent) udpOnce(ctx context.Context) error {
 		return err
 	}
 	defer conn.Close()
+	// Unblock the read loop when the tunnel is stopped or moved.
+	defer context.AfterFunc(ctx, func() { conn.Close() })()
 
 	key := tunnel.AuthKey(a.state.Token)
 	register := func() {
@@ -268,7 +272,7 @@ func (a *Agent) udpOnce(ctx context.Context) error {
 }
 
 type udpClient struct {
-	server *net.UDPConn // connection back to host:8446
+	server *net.UDPConn // connection back to the host tunnel
 	mu     sync.Mutex
 	dials  map[uint32]*net.UDPConn // sid -> client-side socket
 }

internal/agent/update.go

@@ -17,7 +17,7 @@ import (
 
 // doUpdate downloads the latest agent binary for this platform, atomically
 // replaces the running executable, and schedules a service restart. It never
-// uninstalls — only updates.
+// uninstalls - only updates.
 func (a *Agent) doUpdate() proto.TaskResult {
 	exe, err := os.Executable()
 	if err != nil {

internal/agent/users.go

@@ -33,6 +33,8 @@ func dispatchTask(env proto.TaskEnvelope) (any, error) {
 	switch env.Type {
 	case proto.TaskSysUsers:
 		return sysUsers(), nil
+	case proto.TaskSysStat:
+		return sysStat()
 	case proto.TaskSysUserAdd:
 		var a proto.SysUserAddArgs
 		_ = json.Unmarshal(env.Args, &a)

internal/proto/proto.go

@@ -89,8 +89,14 @@ const (
 	TaskSysUpdate  = "sys.update"  // download the latest agent binary and restart
 	TaskSysUsers   = "sys.users"   // report the agent's user and the login-capable users
 	TaskSysUserAdd = "sys.useradd" // create a new OS user
+	TaskSysStat    = "sys.stat"    // CPU load, RAM and disk usage right now
+	TaskSysSpeed   = "sys.speed"   // measure the link to the server (ping, down, up)
 )
 
+// FSReadCap bounds how many bytes TaskFSRead returns (5 MiB). The panel lets a
+// file be edited only when it fits, so that a save never cuts it short.
+const FSReadCap = 5 * 1024 * 1024
+
 // TaskEnvelope is what the agent fetches for a task id.
 type TaskEnvelope struct {
 	Type string          `json:"type"`
@@ -162,3 +168,35 @@ type SysUserAddArgs struct {
 	Password string `json:"password,omitempty"` // empty leaves the account without a password
 	Sudo     bool   `json:"sudo"`               // add to the sudo/wheel group
 }
+
+// SysStatResult is returned for TaskSysStat. Sizes are in bytes.
+type SysStatResult struct {
+	CPU       float64 `json:"cpu"` // load across all cores, 0..100
+	NCPU      int     `json:"ncpu"`
+	MemTotal  uint64  `json:"mem_total"`
+	MemUsed   uint64  `json:"mem_used"`
+	DiskTotal uint64  `json:"disk_total"` // filesystem holding "/"
+	DiskFree  uint64  `json:"disk_free"`
+}
+
+// SysSpeedArgs are the arguments of TaskSysSpeed.
+type SysSpeedArgs struct {
+	// Relay makes the agent use the relayed streams, which the server pipes
+	// to and from the browser.
+	Relay bool `json:"relay,omitempty"`
+	// WindowMs is how long to measure each direction for; 0 leaves it to the
+	// agent (3 s, all an agent that predates this argument does).
+	WindowMs int `json:"window_ms,omitempty"`
+}
+
+// SysSpeedResult is returned for TaskSysSpeed: the agent's HTTP link to the
+// server as the agent measured it. Down is server -> agent.
+type SysSpeedResult struct {
+	PingMs  float64 `json:"ping_ms"`
+	DownBps float64 `json:"down_bps"` // bits per second
+	UpBps   float64 `json:"up_bps"`
+	Relay   bool    `json:"relay,omitempty"` // the streams went through the relay
+	// Partial marks a test the server cut short: the numbers are what it had
+	// counted on its own side by then.
+	Partial bool `json:"partial,omitempty"`
+}

internal/server/agents.go

@@ -24,6 +24,16 @@ func (s *Server) authenticateAgent(r *http.Request) *Agent {
 	return a
 }
 
+// online reports whether the agent is connected right now: the hub knows from
+// its control polls. Right after a start it cannot tell yet, so the last poll
+// recorded in the database decides.
+func (s *Server) online(a *Agent) bool {
+	if on, ok := s.hub.Online(a.ID); ok {
+		return on
+	}
+	return a.recentlySeen()
+}
+
 func bearerToken(r *http.Request) string {
 	h := r.Header.Get("Authorization")
 	if strings.HasPrefix(h, "Bearer ") {

internal/server/config.go

@@ -3,6 +3,9 @@ package server
 import (
 	"crypto/rand"
 	"encoding/hex"
+	"strconv"
+
+	lpra "github.com/x-grk/longpolling-remote-access"
 )
 
 // Config keys stored in the config table.
@@ -12,15 +15,17 @@ const (
 	cfgSetupDone    = "setup_done"
 	cfgInstallCode  = "install_code"
 	cfgUfwEnabled   = "ufw_enabled"
+	cfgTunnelHost   = "tunnel_host"
+	cfgTunnelPort   = "tunnel_port"
 )
 
 // DefaultHostAddress is the public URL agents dial by default. It is baked into
 // the rendered install.sh and can be changed from the settings page.
 const DefaultHostAddress = "https://REDACTED:8445"
 
-// Version is the server build version, injected at compile time via -ldflags
-// (-X .../internal/server.Version=...). It is the newest version agents update to.
-var Version = "dev"
+// Version is the server build version (see VERSION.txt). It is the newest
+// version agents update to.
+var Version = lpra.Version
 
 // ensureDefaults seeds the host address and a random enroll secret on first boot.
 func (db *DB) ensureDefaults() error {
@@ -86,6 +91,24 @@ func (db *DB) SetUfwEnabled(on bool) error {
 	return db.SetConfig(cfgUfwEnabled, "0")
 }
 
+// TunnelHost is the host agents dial for the direct tunnel. Empty means the
+// host of the URL they already reach the panel on.
+func (db *DB) TunnelHost() string {
+	v, _ := db.GetConfig(cfgTunnelHost)
+	return v
+}
+
+// TunnelPort is the direct-tunnel port set in Settings, or 0 when it is left
+// at the port of the server's -tunnel address.
+func (db *DB) TunnelPort() int {
+	v, _ := db.GetConfig(cfgTunnelPort)
+	n, _ := strconv.Atoi(v)
+	if n < 1 || n > 65535 {
+		return 0
+	}
+	return n
+}
+
 func (db *DB) SetupDone() bool {
 	v, _ := db.GetConfig(cfgSetupDone)
 	return v == "1"

internal/server/db.go

@@ -105,6 +105,8 @@ CREATE TABLE IF NOT EXISTS forward_rules (
 		`ALTER TABLE ufw_rules ADD COLUMN rule_id INTEGER NOT NULL DEFAULT 0`,
 		`ALTER TABLE agents ADD COLUMN run_user TEXT NOT NULL DEFAULT ''`,
 		`ALTER TABLE agents ADD COLUMN login_user TEXT NOT NULL DEFAULT ''`,
+		`ALTER TABLE forward_rules ADD COLUMN no_ufw INTEGER NOT NULL DEFAULT 0`,
+		`ALTER TABLE forward_rules ADD COLUMN label TEXT NOT NULL DEFAULT ''`,
 	} {
 		if _, err := db.sql.Exec(alter); err != nil && !strings.Contains(err.Error(), "duplicate column") {
 			return err
@@ -238,8 +240,9 @@ func (a Agent) TerminalUser() string {
 	return firstNonEmpty(a.LoginUser, a.RunUser, "root")
 }
 
-// Online reports whether the agent polled recently enough to be considered up.
-func (a Agent) Online() bool {
+// recentlySeen is the fallback for "online" right after a server start, while
+// the hub has not seen the agents' polls yet (see Server.online).
+func (a Agent) recentlySeen() bool {
 	return time.Since(a.LastSeen) < 45*time.Second
 }
 
@@ -327,6 +330,8 @@ type ForwardRule struct {
 	HostPort   int
 	ListenAddr string
 	Proto      string
+	NoUfw      bool   // the panel opens no ufw rule for this forward
+	Label      string // optional note shown next to the rule
 }
 
 func (db *DB) CreateForwardRule(r ForwardRule) (int64, error) {
@@ -334,9 +339,9 @@ func (db *DB) CreateForwardRule(r ForwardRule) (int64, error) {
 		r.Proto = "http"
 	}
 	res, err := db.sql.Exec(
-		`INSERT INTO forward_rules(agent_id, client_port, host_port, listen_addr, proto, created_at)
-		 VALUES(?, ?, ?, ?, ?, ?)`,
-		r.AgentID, r.ClientPort, r.HostPort, r.ListenAddr, r.Proto, time.Now().Unix())
+		`INSERT INTO forward_rules(agent_id, client_port, host_port, listen_addr, proto, no_ufw, label, created_at)
+		 VALUES(?, ?, ?, ?, ?, ?, ?, ?)`,
+		r.AgentID, r.ClientPort, r.HostPort, r.ListenAddr, r.Proto, r.NoUfw, r.Label, time.Now().Unix())
 	if err != nil {
 		return 0, err
 	}
@@ -345,7 +350,7 @@ func (db *DB) CreateForwardRule(r ForwardRule) (int64, error) {
 
 func (db *DB) ListForwardRules() ([]ForwardRule, error) {
 	rows, err := db.sql.Query(
-		`SELECT id, agent_id, client_port, host_port, listen_addr, proto FROM forward_rules ORDER BY id`)
+		`SELECT id, agent_id, client_port, host_port, listen_addr, proto, no_ufw, label FROM forward_rules ORDER BY id`)
 	if err != nil {
 		return nil, err
 	}
@@ -353,7 +358,7 @@ func (db *DB) ListForwardRules() ([]ForwardRule, error) {
 	var out []ForwardRule
 	for rows.Next() {
 		var r ForwardRule
-		if err := rows.Scan(&r.ID, &r.AgentID, &r.ClientPort, &r.HostPort, &r.ListenAddr, &r.Proto); err != nil {
+		if err := rows.Scan(&r.ID, &r.AgentID, &r.ClientPort, &r.HostPort, &r.ListenAddr, &r.Proto, &r.NoUfw, &r.Label); err != nil {
 			return nil, err
 		}
 		out = append(out, r)
@@ -378,8 +383,8 @@ func (db *DB) ListForwardRulesByAgent(agentID string) ([]ForwardRule, error) {
 func (db *DB) GetForwardRule(id int64) (*ForwardRule, error) {
 	r := &ForwardRule{}
 	err := db.sql.QueryRow(
-		`SELECT id, agent_id, client_port, host_port, listen_addr, proto FROM forward_rules WHERE id = ?`, id).
-		Scan(&r.ID, &r.AgentID, &r.ClientPort, &r.HostPort, &r.ListenAddr, &r.Proto)
+		`SELECT id, agent_id, client_port, host_port, listen_addr, proto, no_ufw, label FROM forward_rules WHERE id = ?`, id).
+		Scan(&r.ID, &r.AgentID, &r.ClientPort, &r.HostPort, &r.ListenAddr, &r.Proto, &r.NoUfw, &r.Label)
 	if err == sql.ErrNoRows {
 		return nil, nil
 	}
@@ -397,7 +402,20 @@ type UfwRule struct {
 	ID     int64
 	Port   int
 	Proto  string
-	RuleID int64 // bound forward rule id, or 0 for shared/manual (e.g. tunnel 8446)
+	RuleID int64 // bound forward rule id, 0 for shared (the tunnel port), ufwManual for one added in Settings
+}
+
+// ufwManual is the RuleID of a ufw rule the admin added by hand: no forward
+// owns it, so only the admin removes it.
+const ufwManual = -1
+
+// Manual reports whether the admin added the rule by hand.
+func (r UfwRule) Manual() bool { return r.RuleID == ufwManual }
+
+// SetUfwRuleManual hands a tracked rule over to the admin.
+func (db *DB) SetUfwRuleManual(port int, proto string) error {
+	_, err := db.sql.Exec(`UPDATE ufw_rules SET rule_id = ? WHERE port = ? AND proto = ?`, ufwManual, port, proto)
+	return err
 }
 
 func (db *DB) AddUfwRule(port int, proto string, ruleID int64) error {

internal/server/forward.go

@@ -14,8 +14,8 @@ import (
 // supports three transports:
 //   - "http": tunneled over the HTTP long-poll channel (works anywhere nginx
 //     reaches, highest latency);
-//   - "tcp":  direct TCP multiplexed over the 8446 tunnel (low latency);
-//   - "udp":  direct UDP over the 8446 channel.
+//   - "tcp":  direct TCP multiplexed over the tunnel port (low latency);
+//   - "udp":  direct UDP over the tunnel port.
 type forwardManager struct {
 	hub *Hub
 	tun *tunnelHub
@@ -92,11 +92,11 @@ func (m *forwardManager) acceptTCP(rule ForwardRule, ln net.Listener) {
 	}
 }
 
-// bridgeDirect wires a connection to the agent's low-latency 8446 tunnel.
+// bridgeDirect wires a connection to the agent's low-latency direct tunnel.
 func (m *forwardManager) bridgeDirect(rule ForwardRule, conn net.Conn) {
 	at := m.tun.get(rule.AgentID)
 	if at == nil {
-		// No direct tunnel (agent offline or 8446 unreachable).
+		// No direct tunnel (agent offline or the tunnel port unreachable).
 		conn.Close()
 		return
 	}

internal/server/handlers_agent.go

@@ -16,7 +16,7 @@ func writeJSON(w http.ResponseWriter, v any) {
 	_ = json.NewEncoder(w).Encode(v)
 }
 
-// POST /api/agent/enroll — exchange the shared enroll secret for a per-agent id+token.
+// POST /api/agent/enroll - exchange the shared enroll secret for a per-agent id+token.
 func (s *Server) handleEnroll(w http.ResponseWriter, r *http.Request) {
 	secret := r.Header.Get("X-Enroll-Secret")
 	if !constantTimeEqual(secret, s.db.EnrollSecret()) {
@@ -36,7 +36,7 @@ func (s *Server) handleEnroll(w http.ResponseWriter, r *http.Request) {
 	writeJSON(w, proto.EnrollResponse{AgentID: id, Token: token})
 }
 
-// GET /api/agent/poll — control channel. Held until a job is queued or timeout.
+// GET /api/agent/poll - control channel. Held until a job is queued or timeout.
 func (s *Server) handlePoll(w http.ResponseWriter, r *http.Request) {
 	a := s.authenticateAgent(r)
 	if a == nil {
@@ -52,10 +52,34 @@ func (s *Server) handlePoll(w http.ResponseWriter, r *http.Request) {
 	} else {
 		_ = s.db.TouchAgent(a.ID)
 	}
-	writeJSON(w, s.hub.WaitControl(a.ID, pollHold))
+	msg := s.hub.WaitControl(r.Context().Done(), a.ID, pollHold)
+	// Set after the hold so a port changed meanwhile reaches the agent now.
+	s.setTunnelHeader(w)
+	writeJSON(w, msg)
 }
 
-// GET /api/agent/task/{id} — the agent fetches the task to run.
+// tunnelAddrHeader carries the direct-tunnel address ("host:port", host empty
+// = the panel's host) to agents, on every poll and on /api/agent/config.
+const tunnelAddrHeader = "X-Tunnel-Addr"
+
+func (s *Server) setTunnelHeader(w http.ResponseWriter) {
+	if addr := s.tunnelAdvert(); addr != "" {
+		w.Header().Set(tunnelAddrHeader, addr)
+	}
+}
+
+// GET /api/agent/config - settings an agent picks up when it connects, without
+// waiting out a poll hold.
+func (s *Server) handleAgentConfig(w http.ResponseWriter, r *http.Request) {
+	if s.authenticateAgent(r) == nil {
+		http.Error(w, "unauthorized", http.StatusUnauthorized)
+		return
+	}
+	s.setTunnelHeader(w)
+	w.WriteHeader(http.StatusNoContent)
+}
+
+// GET /api/agent/task/{id} - the agent fetches the task to run.
 func (s *Server) handleTaskFetch(w http.ResponseWriter, r *http.Request) {
 	if s.authenticateAgent(r) == nil {
 		http.Error(w, "unauthorized", http.StatusUnauthorized)
@@ -69,7 +93,7 @@ func (s *Server) handleTaskFetch(w http.ResponseWriter, r *http.Request) {
 	writeJSON(w, env)
 }
 
-// POST /api/agent/task/{id}/result — the agent returns the task result.
+// POST /api/agent/task/{id}/result - the agent returns the task result.
 func (s *Server) handleTaskResult(w http.ResponseWriter, r *http.Request) {
 	if s.authenticateAgent(r) == nil {
 		http.Error(w, "unauthorized", http.StatusUnauthorized)
@@ -84,7 +108,7 @@ func (s *Server) handleTaskResult(w http.ResponseWriter, r *http.Request) {
 	w.WriteHeader(http.StatusNoContent)
 }
 
-// GET /api/agent/term/{sid}/in — downstream (panel -> agent) long-poll.
+// GET /api/agent/term/{sid}/in - downstream (panel -> agent) long-poll.
 func (s *Server) handleTermIn(w http.ResponseWriter, r *http.Request) {
 	if s.authenticateAgent(r) == nil {
 		http.Error(w, "unauthorized", http.StatusUnauthorized)
@@ -103,7 +127,7 @@ func (s *Server) handleTermIn(w http.ResponseWriter, r *http.Request) {
 	writeJSON(w, proto.InBatch{Frames: frames})
 }
 
-// POST /api/agent/term/{sid}/out — upstream (agent PTY -> panel).
+// POST /api/agent/term/{sid}/out - upstream (agent PTY -> panel).
 func (s *Server) handleTermOut(w http.ResponseWriter, r *http.Request) {
 	if s.authenticateAgent(r) == nil {
 		http.Error(w, "unauthorized", http.StatusUnauthorized)

internal/server/handlers_panel.go

@@ -5,6 +5,7 @@ import (
 	"errors"
 	"fmt"
 	"log"
+	"net"
 	"net/http"
 	"net/url"
 	"slices"
@@ -117,7 +118,8 @@ func (s *Server) handleDashboard(w http.ResponseWriter, r *http.Request) {
 	}
 	rows := make([]row, 0, len(agents))
 	for _, a := range agents {
-		rows = append(rows, row{Agent: a, Online: a.Online(), Seen: humanSince(a.LastSeen)})
+		on := s.online(&a)
+		rows = append(rows, row{Agent: a, Online: on, Seen: seenText(on, a.LastSeen)})
 	}
 	s.render(w, "dashboard.html", map[string]any{
 		"Admin":  s.currentAdmin(r),
@@ -126,6 +128,36 @@ func (s *Server) handleDashboard(w http.ResponseWriter, r *http.Request) {
 	})
 }
 
+// seenText is the "activity" cell: a connected agent is active now, whatever
+// the time of its last recorded poll.
+func seenText(online bool, lastSeen time.Time) string {
+	if online {
+		return "сейчас"
+	}
+	return humanSince(lastSeen)
+}
+
+// GET /api/panel/agents/presence - who is online, for the dashboard to keep
+// its status column live without reloading.
+func (s *Server) handlePresence(w http.ResponseWriter, r *http.Request) {
+	agents, err := s.db.ListAgents()
+	if err != nil {
+		http.Error(w, "internal error", http.StatusInternalServerError)
+		return
+	}
+	type item struct {
+		ID     string `json:"id"`
+		Online bool   `json:"online"`
+		Seen   string `json:"seen"`
+	}
+	out := make([]item, 0, len(agents))
+	for _, a := range agents {
+		on := s.online(&a)
+		out = append(out, item{ID: a.ID, Online: on, Seen: seenText(on, a.LastSeen)})
+	}
+	writeJSON(w, out)
+}
+
 func (s *Server) handleTerminalPage(w http.ResponseWriter, r *http.Request) {
 	id := r.PathValue("id")
 	a, err := s.db.GetAgent(id)
@@ -145,7 +177,16 @@ func (s *Server) handleAgentDelete(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 	id := r.PathValue("id")
+	// Its forward rules go with it: left behind they would keep their host
+	// ports bound and busy with no page to remove them from.
+	rules, _ := s.db.ListForwardRulesByAgent(id)
+	for _, rule := range rules {
+		s.removeForward(rule.ID)
+	}
 	_ = s.db.DeleteAgent(id)
+	s.stats.drop(id)
+	s.relays.drop(id, nil)
+	s.hub.Forget(id)
 	http.Redirect(w, r, "/", http.StatusSeeOther)
 }
 
@@ -166,7 +207,7 @@ func (s *Server) handleAgentEdit(w http.ResponseWriter, r *http.Request) {
 		"UserErr":       r.URL.Query().Get("uerr"),
 	}
 	// The user list lives on the machine, so it is only known while it is online.
-	if a.Online() {
+	if s.online(a) {
 		if users, err := s.agentUsers(id); err == nil {
 			data["Users"] = users
 		} else {
@@ -187,7 +228,7 @@ func (s *Server) agentUsers(agentID string) (*proto.SysUsersResult, error) {
 	case res := <-ch:
 		if !res.OK {
 			// Agents older than 0.0.2 don't know this task.
-			return nil, errors.New("клиент не поддерживает выбор пользователя — обновите его")
+			return nil, errors.New("клиент не поддерживает выбор пользователя - обновите его")
 		}
 		var out proto.SysUsersResult
 		if err := json.Unmarshal(res.Data, &out); err != nil {
@@ -217,8 +258,8 @@ func (s *Server) handleAgentSetUser(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 	name := strings.TrimSpace(r.FormValue("user"))
-	if !a.Online() {
-		editUserRedirect(w, r, id, "uerr", "Машина офлайн — сменить пользователя нельзя.")
+	if !s.online(a) {
+		editUserRedirect(w, r, id, "uerr", "Машина офлайн - сменить пользователя нельзя.")
 		return
 	}
 	// Only accept a user the machine itself reports, so a typo (or an agent too
@@ -258,8 +299,8 @@ func (s *Server) handleAgentAddUser(w http.ResponseWriter, r *http.Request) {
 		http.NotFound(w, r)
 		return
 	}
-	if !a.Online() {
-		editUserRedirect(w, r, id, "uerr", "Машина офлайн — создать пользователя нельзя.")
+	if !s.online(a) {
+		editUserRedirect(w, r, id, "uerr", "Машина офлайн - создать пользователя нельзя.")
 		return
 	}
 	name := strings.TrimSpace(r.FormValue("name"))
@@ -299,7 +340,7 @@ func (s *Server) handleAgentUpdate(w http.ResponseWriter, r *http.Request) {
 		http.NotFound(w, r)
 		return
 	}
-	if !a.Online() {
+	if !s.online(a) {
 		http.Redirect(w, r, "/agents/"+id+"/edit?updated=0", http.StatusSeeOther)
 		return
 	}
@@ -349,9 +390,80 @@ func (s *Server) handleSettings(w http.ResponseWriter, r *http.Request) {
 		"UfwRunnable":   ufwRunnable,
 		"UfwEnabled":    s.db.UfwEnabled(),
 		"UfwRules":      ufwRules,
+		"UfwError":      s.ufw.LastError(),
+		"TunnelPort":    s.TunnelPort(),
+		"TunnelDefault": s.tunnelDefault,
+		"TunnelHost":    s.db.TunnelHost(),
+		"TunnelCustom":  s.db.TunnelPort() > 0,
+		"Error": map[string]string{
+			"tunnel_host":   "Некорректный хост туннеля: нужен IP или имя без схемы и порта.",
+			"tunnel_port":   "Некорректный порт туннеля.",
+			"ufw_port":      "Некорректное правило ufw: нужен порт 1-65535 и протокол tcp или udp.",
+			"ufw_off":       "Правило ufw не добавлено: ufw выключен или интеграция с ним отключена.",
+			"ufw_failed":    "Правило ufw не добавлено: команда ufw завершилась ошибкой.",
+			"ufw_exists":    "Этот порт уже открыт в ufw не панелью - правило осталось как было, панель его не отслеживает.",
+			"tunnel_listen": "Не удалось занять новый порт туннеля на хосте (возможно, уже используется). Порт не изменён.",
+		}[r.URL.Query().Get("err")],
 	})
 }
 
+// POST /settings/tunnel - host and port agents use for the direct tunnel.
+func (s *Server) handleSetTunnel(w http.ResponseWriter, r *http.Request) {
+	if !checkCSRF(r) {
+		http.Error(w, "bad csrf", http.StatusForbidden)
+		return
+	}
+	if s.tunnelDefault == 0 {
+		http.Redirect(w, r, "/settings", http.StatusSeeOther)
+		return
+	}
+	host := strings.TrimSpace(r.FormValue("tunnel_host"))
+	host = strings.TrimSuffix(strings.TrimPrefix(host, "["), "]")
+	if !validTunnelHost(host) {
+		http.Redirect(w, r, "/settings?err=tunnel_host", http.StatusSeeOther)
+		return
+	}
+	// An empty port goes back to the one the server was started with.
+	port, custom := s.tunnelDefault, ""
+	if v := strings.TrimSpace(r.FormValue("tunnel_port")); v != "" {
+		n, err := strconv.Atoi(v)
+		if err != nil || n < 1 || n > 65535 {
+			http.Redirect(w, r, "/settings?err=tunnel_port", http.StatusSeeOther)
+			return
+		}
+		port = n
+		if n != s.tunnelDefault {
+			custom = v
+		}
+	}
+	if err := s.setTunnelPort(port); err != nil {
+		log.Printf("tunnel: move to port %d: %v", port, err)
+		http.Redirect(w, r, "/settings?err=tunnel_listen", http.StatusSeeOther)
+		return
+	}
+	_ = s.db.SetConfig(cfgTunnelPort, custom)
+	_ = s.db.SetConfig(cfgTunnelHost, host)
+	http.Redirect(w, r, "/settings", http.StatusSeeOther)
+}
+
+// validTunnelHost accepts an empty value, an IP, or a bare host name.
+func validTunnelHost(host string) bool {
+	if host == "" || net.ParseIP(host) != nil {
+		return true
+	}
+	if len(host) > 253 {
+		return false
+	}
+	for _, c := range host {
+		switch {
+		case c >= 'a' && c <= 'z', c >= 'A' && c <= 'Z', c >= '0' && c <= '9', c == '-', c == '.', c == '_':
+		default:
+			return false
+		}
+	}
+	return true
+}
+
 func (s *Server) handleSetHost(w http.ResponseWriter, r *http.Request) {
 	if !checkCSRF(r) {
 		http.Error(w, "bad csrf", http.StatusForbidden)
@@ -408,10 +520,33 @@ func (s *Server) handleUfwToggle(w http.ResponseWriter, r *http.Request) {
 		http.Error(w, "bad csrf", http.StatusForbidden)
 		return
 	}
-	_ = s.db.SetUfwEnabled(r.FormValue("enabled") == "1")
+	on := r.FormValue("enabled") == "1"
+	_ = s.db.SetUfwEnabled(on)
+	if on {
+		// Open what forwards created while the integration was off need.
+		s.ufw.sync()
+	}
 	http.Redirect(w, r, "/settings", http.StatusSeeOther)
 }
 
+func (s *Server) handleUfwAdd(w http.ResponseWriter, r *http.Request) {
+	if !checkCSRF(r) {
+		http.Error(w, "bad csrf", http.StatusForbidden)
+		return
+	}
+	port, _ := strconv.Atoi(strings.TrimSpace(r.FormValue("port")))
+	proto := r.FormValue("proto")
+	if port < 1 || port > 65535 || (proto != "tcp" && proto != "udp") {
+		http.Redirect(w, r, "/settings?err=ufw_port", http.StatusSeeOther)
+		return
+	}
+	target := "/settings"
+	if key := s.ufw.allowManual(port, proto); key != "" {
+		target += "?err=" + key
+	}
+	http.Redirect(w, r, target, http.StatusSeeOther)
+}
+
 func (s *Server) handleUfwRevoke(w http.ResponseWriter, r *http.Request) {
 	if !checkCSRF(r) {
 		http.Error(w, "bad csrf", http.StatusForbidden)

internal/server/handlers_panel_fs.go

@@ -34,10 +34,10 @@ func (s *Server) handleFilesPage(w http.ResponseWriter, r *http.Request) {
 		http.NotFound(w, r)
 		return
 	}
-	s.render(w, "files.html", map[string]any{"Agent": a})
+	s.render(w, "files.html", map[string]any{"Agent": a, "EditLimit": proto.FSReadCap})
 }
 
-// POST /api/panel/agents/{id}/fs/{op} — run a file-manager operation on the
+// POST /api/panel/agents/{id}/fs/{op} - run a file-manager operation on the
 // agent and return its result. The request body is the op's JSON args and is
 // forwarded verbatim to the agent.
 func (s *Server) handleFSOp(w http.ResponseWriter, r *http.Request) {
@@ -53,7 +53,7 @@ func (s *Server) handleFSOp(w http.ResponseWriter, r *http.Request) {
 		http.NotFound(w, r)
 		return
 	}
-	if !a.Online() {
+	if !s.online(a) {
 		writeJSON(w, proto.TaskResult{Error: "машина офлайн"})
 		return
 	}
@@ -74,7 +74,7 @@ func (s *Server) handleFSOp(w http.ResponseWriter, r *http.Request) {
 	}
 }
 
-// GET /api/panel/agents/{id}/fs/download?path=... — stream a file as a download.
+// GET /api/panel/agents/{id}/fs/download?path=... - stream a file as a download.
 func (s *Server) handleFSDownload(w http.ResponseWriter, r *http.Request) {
 	agentID := r.PathValue("id")
 	p := r.URL.Query().Get("path")
@@ -83,7 +83,7 @@ func (s *Server) handleFSDownload(w http.ResponseWriter, r *http.Request) {
 		http.NotFound(w, r)
 		return
 	}
-	if !a.Online() {
+	if !s.online(a) {
 		http.Error(w, "машина офлайн", http.StatusServiceUnavailable)
 		return
 	}

internal/server/handlers_panel_fwd.go

@@ -3,6 +3,7 @@ package server
 import (
 	"log"
 	"net/http"
+	"net/url"
 	"strconv"
 	"strings"
 )
@@ -17,6 +18,7 @@ func (s *Server) handleForwardsPage(w http.ResponseWriter, r *http.Request) {
 	rules, _ := s.db.ListForwardRulesByAgent(id)
 	errMsg := map[string]string{
 		"busy":   "Этот порт хоста уже занят другим правилом.",
+		"tunnel": "Этот порт занят прямым туннелем панели (см. Настройки).",
 		"port":   "Некорректный номер порта.",
 		"listen": "Не удалось занять порт на хосте (возможно, уже используется).",
 		"db":     "Ошибка базы данных.",
@@ -26,9 +28,27 @@ func (s *Server) handleForwardsPage(w http.ResponseWriter, r *http.Request) {
 		"Rules":      rules,
 		"CSRF":       csrfToken(r),
 		"Error":      errMsg,
+		"TunnelPort": s.TunnelPort(),
+		"PanelPort":  panelPort(s.db.HostAddress()),
+		"UfwEnabled": s.ufw.enabled(),
 	})
 }
 
+// panelPort is the port of the panel URL agents dial, for the mode hints.
+func panelPort(host string) string {
+	u, err := url.Parse(host)
+	if err != nil {
+		return ""
+	}
+	if p := u.Port(); p != "" {
+		return p
+	}
+	if u.Scheme == "http" {
+		return "80"
+	}
+	return "443"
+}
+
 // POST /agents/{id}/forwards/add
 func (s *Server) handleForwardAdd(w http.ResponseWriter, r *http.Request) {
 	if !checkCSRF(r) {
@@ -57,12 +77,17 @@ func (s *Server) handleForwardAdd(w http.ResponseWriter, r *http.Request) {
 		http.Redirect(w, r, "/agents/"+id+"/forwards?err=port", http.StatusSeeOther)
 		return
 	}
-	// Reject a host port already bound by another forward rule.
+	// Reject a host port already bound by another forward rule or the tunnel.
+	if hostPort == s.TunnelPort() {
+		http.Redirect(w, r, "/agents/"+id+"/forwards?err=tunnel", http.StatusSeeOther)
+		return
+	}
 	if s.db.HostPortUsed(hostPort) {
 		http.Redirect(w, r, "/agents/"+id+"/forwards?err=busy", http.StatusSeeOther)
 		return
 	}
-	rule := ForwardRule{AgentID: id, ClientPort: clientPort, HostPort: hostPort, ListenAddr: listenAddr, Proto: protoKind}
+	rule := ForwardRule{AgentID: id, ClientPort: clientPort, HostPort: hostPort, ListenAddr: listenAddr, Proto: protoKind,
+		NoUfw: r.FormValue("no_ufw") != "", Label: forwardLabel(r.FormValue("label"))}
 	ruleID, err := s.db.CreateForwardRule(rule)
 	if err != nil {
 		http.Redirect(w, r, "/agents/"+id+"/forwards?err=db", http.StatusSeeOther)
@@ -89,13 +114,31 @@ func (s *Server) handleForwardDelete(w http.ResponseWriter, r *http.Request) {
 	}
 	rid, _ := strconv.ParseInt(r.PathValue("rid"), 10, 64)
 	rule, _ := s.db.GetForwardRule(rid)
-	s.fwd.close(rid)
-	_ = s.db.DeleteForwardRule(rid)
-	// Remove the ufw rule bound to this forward rule (shared 8446 stays).
-	s.ufw.revokeForRule(rid)
+	s.removeForward(rid)
 	dest := "/"
 	if rule != nil {
 		dest = "/agents/" + rule.AgentID + "/forwards"
 	}
 	http.Redirect(w, r, dest, http.StatusSeeOther)
 }
+
+// removeForward closes a forward rule's listener and deletes the rule, along
+// with the ufw rule bound to it (the shared tunnel port stays while another
+// direct forward needs it).
+func (s *Server) removeForward(rid int64) {
+	s.fwd.close(rid)
+	_ = s.db.DeleteForwardRule(rid)
+	s.ufw.revokeForRule(rid)
+}
+
+// forwardLabelMax bounds a rule's label, in characters.
+const forwardLabelMax = 80
+
+// forwardLabel tidies the optional note of a rule: one line, bounded length.
+func forwardLabel(v string) string {
+	v = strings.Join(strings.Fields(v), " ")
+	if r := []rune(v); len(r) > forwardLabelMax {
+		v = string(r[:forwardLabelMax])
+	}
+	return v
+}

internal/server/handlers_panel_stat.go

@@ -0,0 +1,542 @@
+package server
+
+import (
+	"crypto/rand"
+	"encoding/json"
+	"errors"
+	"io"
+	"net/http"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"github.com/x-grk/longpolling-remote-access/internal/proto"
+)
+
+const (
+	// statTaskTimeout bounds how long a status request waits for the agent.
+	statTaskTimeout = 8 * time.Second
+	// statCacheFor is how long one sample answers every open status page, so
+	// several tabs cost the agent a single reading.
+	statCacheFor = 2 * time.Second
+	// speedWindow is how long the agent is asked to measure each direction
+	// for. An agent that predates the argument keeps to its own 3 s.
+	speedWindow = 7 * time.Second
+	// speedTaskTimeout is how long a speed test may take. One that is not done
+	// by then is answered with what the server has counted itself.
+	speedTaskTimeout = 35 * time.Second
+	// speedDownCap bounds one download stream; speedDownFor ends it if the
+	// agent does not hang up first.
+	speedDownCap = 1 << 30
+	speedDownFor = 2 * speedWindow
+	speedUpCap   = 64 << 20
+	// speedRelayUpFor is how long the agent's upload is passed on to the
+	// browser: the agent's own window with slack.
+	speedRelayUpFor = speedWindow + time.Second
+)
+
+// statCache holds the last sample per agent and serializes its refresh.
+type statCache struct {
+	mu sync.Mutex
+	m  map[string]*statEntry
+}
+
+type statEntry struct {
+	mu  sync.Mutex
+	at  time.Time
+	res proto.TaskResult
+}
+
+func (c *statCache) entry(agentID string) *statEntry {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	if c.m == nil {
+		c.m = map[string]*statEntry{}
+	}
+	e := c.m[agentID]
+	if e == nil {
+		e = &statEntry{}
+		c.m[agentID] = e
+	}
+	return e
+}
+
+func (c *statCache) drop(agentID string) {
+	c.mu.Lock()
+	delete(c.m, agentID)
+	c.mu.Unlock()
+}
+
+func (s *Server) handleStatusPage(w http.ResponseWriter, r *http.Request) {
+	a, err := s.db.GetAgent(r.PathValue("id"))
+	if err != nil || a == nil {
+		http.NotFound(w, r)
+		return
+	}
+	s.render(w, "status.html", map[string]any{"Agent": a, "RelayUpMs": speedRelayUpFor.Milliseconds()})
+}
+
+// runTask runs a one-shot task on the agent and waits for its result.
+func (s *Server) runTask(agentID, typ string, args []byte, timeout time.Duration) (proto.TaskResult, error) {
+	taskID, ch := s.hub.CreateTask(agentID, typ, args)
+	defer s.hub.DiscardTask(taskID)
+	t := time.NewTimer(timeout)
+	defer t.Stop()
+	select {
+	case res := <-ch:
+		return res, nil
+	case <-t.C:
+		return proto.TaskResult{}, errors.New("таймаут ожидания клиента")
+	}
+}
+
+// onlineAgent answers the request itself and returns false when the agent is
+// unknown or offline.
+func (s *Server) onlineAgent(w http.ResponseWriter, r *http.Request) (string, bool) {
+	id := r.PathValue("id")
+	a, err := s.db.GetAgent(id)
+	if err != nil || a == nil {
+		http.NotFound(w, r)
+		return "", false
+	}
+	if !s.online(a) {
+		writeJSON(w, proto.TaskResult{Error: "машина офлайн"})
+		return "", false
+	}
+	return id, true
+}
+
+// oldAgentError replaces the "unknown task" answer of an agent that predates
+// the task.
+func oldAgentError(res proto.TaskResult) proto.TaskResult {
+	if !res.OK && strings.Contains(res.Error, "неизвестная операция") {
+		res.Error = "клиент не поддерживает эту функцию - обновите его (нужен 0.0.5+)"
+	}
+	return res
+}
+
+// GET /api/panel/agents/{id}/stat - CPU, RAM and disk of the machine right now.
+func (s *Server) handleAgentStat(w http.ResponseWriter, r *http.Request) {
+	id, ok := s.onlineAgent(w, r)
+	if !ok {
+		return
+	}
+	e := s.stats.entry(id)
+	e.mu.Lock()
+	defer e.mu.Unlock()
+	if time.Since(e.at) > statCacheFor {
+		res, err := s.runTask(id, proto.TaskSysStat, nil, statTaskTimeout)
+		if err != nil {
+			// Cached too, so pages queued behind this one don't each wait it out.
+			res = proto.TaskResult{Error: err.Error()}
+		}
+		e.res, e.at = oldAgentError(res), time.Now()
+	}
+	writeJSON(w, e.res)
+}
+
+// POST /api/panel/agents/{id}/speed - have the agent measure its link to us.
+// With relay=1 its streams run through the relay opened for it, to and from
+// the browser.
+func (s *Server) handleAgentSpeed(w http.ResponseWriter, r *http.Request) {
+	id, ok := s.onlineAgent(w, r)
+	if !ok {
+		return
+	}
+	relay := r.URL.Query().Get("relay") != ""
+	m := s.meters.start(id)
+	defer s.meters.stop(id, m)
+	if relay {
+		rl := s.relays.get(id)
+		if rl == nil {
+			writeJSON(w, proto.TaskResult{Error: "замер через браузер не открыт"})
+			return
+		}
+		defer s.relays.drop(id, rl)
+	}
+	args, _ := json.Marshal(proto.SysSpeedArgs{Relay: relay, WindowMs: int(speedWindow.Milliseconds())})
+	res, err := s.runTask(id, proto.TaskSysSpeed, args, speedTaskTimeout)
+	if err != nil {
+		part, ok := m.result()
+		if !ok {
+			writeJSON(w, proto.TaskResult{Error: err.Error()})
+			return
+		}
+		part.Relay = relay
+		data, _ := json.Marshal(part)
+		res = proto.TaskResult{OK: true, Data: data}
+	}
+	res = oldAgentError(res)
+	if relay && res.OK {
+		// An agent that predates the relay ignores the argument and measures
+		// its own link.
+		var d proto.SysSpeedResult
+		if json.Unmarshal(res.Data, &d) != nil || !d.Relay {
+			res = proto.TaskResult{Error: "клиент не умеет замер через браузер - обновите его (нужен 0.0.6+)"}
+		}
+	}
+	writeJSON(w, res)
+}
+
+// speedMeter counts what flows through the streams of one speed test as the
+// server sees it: for the live reading on the page, and for the result of a
+// test that ran out of time.
+type speedMeter struct {
+	mu     sync.Mutex
+	start  time.Time
+	phase  string // "ping", "down", "up"
+	pingAt time.Time
+	pingMs float64
+	down   speedCount
+	up     speedCount
+}
+
+// speedCount is the bytes of one direction and when they went through. The
+// first piece only starts the clock.
+type speedCount struct {
+	n, skip     int64
+	first, last time.Time
+}
+
+func (c *speedCount) add(n int) {
+	now := time.Now()
+	if c.first.IsZero() {
+		c.first, c.skip = now, int64(n)
+	}
+	c.n += int64(n)
+	c.last = now
+}
+
+func (c *speedCount) bps() float64 {
+	d := c.last.Sub(c.first).Seconds()
+	if d <= 0 {
+		return 0
+	}
+	return float64(c.n-c.skip) * 8 / d
+}
+
+// ping notes one of the agent's ping probes: they come one right after
+// another, so the gap between two is its round trip.
+func (m *speedMeter) ping() {
+	if m == nil {
+		return
+	}
+	m.mu.Lock()
+	now := time.Now()
+	if !m.pingAt.IsZero() {
+		if ms := float64(now.Sub(m.pingAt).Microseconds()) / 1000; m.pingMs == 0 || ms < m.pingMs {
+			m.pingMs = ms
+		}
+	}
+	m.pingAt = now
+	m.mu.Unlock()
+}
+
+func (m *speedMeter) add(up bool, n int) {
+	if m == nil || n <= 0 {
+		return
+	}
+	m.mu.Lock()
+	if up {
+		m.phase = "up"
+		m.up.add(n)
+	} else {
+		m.phase = "down"
+		m.down.add(n)
+	}
+	m.mu.Unlock()
+}
+
+// result is the test as counted so far; false with nothing measured yet.
+func (m *speedMeter) result() (proto.SysSpeedResult, bool) {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	res := proto.SysSpeedResult{PingMs: m.pingMs, DownBps: m.down.bps(), UpBps: m.up.bps(), Partial: true}
+	return res, res.DownBps > 0
+}
+
+// meterWriter counts what it passes on; a nil meter counts nothing.
+type meterWriter struct {
+	w  io.Writer
+	m  *speedMeter
+	up bool
+}
+
+func (c meterWriter) Write(p []byte) (int, error) {
+	n, err := c.w.Write(p)
+	c.m.add(c.up, n)
+	return n, err
+}
+
+// speedMeters holds the meter of each agent under test.
+type speedMeters struct {
+	mu sync.Mutex
+	m  map[string]*speedMeter
+}
+
+func (c *speedMeters) start(agentID string) *speedMeter {
+	m := &speedMeter{start: time.Now(), phase: "ping"}
+	c.mu.Lock()
+	if c.m == nil {
+		c.m = map[string]*speedMeter{}
+	}
+	c.m[agentID] = m
+	c.mu.Unlock()
+	return m
+}
+
+func (c *speedMeters) get(agentID string) *speedMeter {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	return c.m[agentID]
+}
+
+// stop forgets the agent's meter if it is still m.
+func (c *speedMeters) stop(agentID string, m *speedMeter) {
+	c.mu.Lock()
+	if c.m[agentID] == m {
+		delete(c.m, agentID)
+	}
+	c.mu.Unlock()
+}
+
+// GET /api/panel/agents/{id}/speed/progress - the bytes counted so far in the
+// agent's running speed test, for the page to turn into a live rate. An empty
+// phase means no test is running.
+func (s *Server) handleSpeedProgress(w http.ResponseWriter, r *http.Request) {
+	var out struct {
+		Phase string `json:"phase"`
+		Down  int64  `json:"down"`
+		Up    int64  `json:"up"`
+		Ms    int64  `json:"ms"` // since the test began, by the server's clock
+	}
+	if m := s.meters.get(r.PathValue("id")); m != nil {
+		m.mu.Lock()
+		out.Phase, out.Down, out.Up = m.phase, m.down.n, m.up.n
+		out.Ms = time.Since(m.start).Milliseconds()
+		m.mu.Unlock()
+	}
+	w.Header().Set("Cache-Control", "no-store")
+	writeJSON(w, out)
+}
+
+// speedBlock is one chunk of incompressible bytes, made once and sent over and
+// over, so a speed test costs the server no CPU beyond the copy.
+var speedBlock = sync.OnceValue(func() []byte {
+	b := make([]byte, 64<<10)
+	rand.Read(b)
+	return b
+})
+
+func speedStreamHeaders(w http.ResponseWriter) {
+	w.Header().Set("Content-Type", "application/octet-stream")
+	w.Header().Set("Cache-Control", "no-store")
+	// Keep a proxy in front from buffering or compressing the stream.
+	w.Header().Set("X-Accel-Buffering", "no")
+}
+
+// GET /api/agent/speed/down?bytes=N - stream N bytes (default: as much as fits
+// in the time window) for the agent to time. bytes=0 is the ping probe.
+func (s *Server) handleSpeedDown(w http.ResponseWriter, r *http.Request) {
+	a := s.authenticateAgent(r)
+	if a == nil {
+		http.Error(w, "unauthorized", http.StatusUnauthorized)
+		return
+	}
+	m := s.meters.get(a.ID)
+	left := speedDownCap
+	if v := r.URL.Query().Get("bytes"); v != "" {
+		if n, err := strconv.Atoi(v); err == nil && n >= 0 && n < left {
+			left = n
+		}
+	}
+	if left == 0 {
+		m.ping()
+	}
+	speedStreamHeaders(w)
+	block := speedBlock()
+	deadline := time.Now().Add(speedDownFor)
+	for left > 0 && time.Now().Before(deadline) && r.Context().Err() == nil {
+		chunk := block
+		if len(chunk) > left {
+			chunk = chunk[:left]
+		}
+		n, err := w.Write(chunk)
+		if err != nil {
+			return
+		}
+		m.add(false, n)
+		left -= n
+	}
+}
+
+// POST /api/agent/speed/up - swallow the agent's upload.
+func (s *Server) handleSpeedUp(w http.ResponseWriter, r *http.Request) {
+	a := s.authenticateAgent(r)
+	if a == nil {
+		http.Error(w, "unauthorized", http.StatusUnauthorized)
+		return
+	}
+	sink := meterWriter{w: io.Discard, m: s.meters.get(a.ID), up: true}
+	_, _ = io.Copy(sink, http.MaxBytesReader(w, r.Body, speedUpCap))
+	w.WriteHeader(http.StatusNoContent)
+}
+
+// speedRelay joins the agent's speed test streams to the browser's, so the
+// bytes travel browser - panel - client. Both pipes are unbuffered: a slow
+// reader holds its writer back, and the rate is that of the whole path.
+type speedRelay struct {
+	downR *io.PipeReader // browser -> agent
+	downW *io.PipeWriter
+	upR   *io.PipeReader // agent -> browser
+	upW   *io.PipeWriter
+}
+
+func (rl *speedRelay) close() {
+	rl.downR.CloseWithError(io.ErrClosedPipe)
+	rl.downW.CloseWithError(io.ErrClosedPipe)
+	rl.upR.CloseWithError(io.ErrClosedPipe)
+	rl.upW.CloseWithError(io.ErrClosedPipe)
+}
+
+// speedRelays holds the relay of each agent under test, one per agent.
+type speedRelays struct {
+	mu sync.Mutex
+	m  map[string]*speedRelay
+}
+
+// open starts a fresh relay for the agent, ending the one it had.
+func (c *speedRelays) open(agentID string) {
+	rl := &speedRelay{}
+	rl.downR, rl.downW = io.Pipe()
+	rl.upR, rl.upW = io.Pipe()
+	c.mu.Lock()
+	if c.m == nil {
+		c.m = map[string]*speedRelay{}
+	}
+	old := c.m[agentID]
+	c.m[agentID] = rl
+	c.mu.Unlock()
+	if old != nil {
+		old.close()
+	}
+}
+
+func (c *speedRelays) get(agentID string) *speedRelay {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	return c.m[agentID]
+}
+
+// drop ends the agent's relay; with rl given, only if it is still that one.
+func (c *speedRelays) drop(agentID string, rl *speedRelay) {
+	c.mu.Lock()
+	cur := c.m[agentID]
+	if cur != nil && (rl == nil || rl == cur) {
+		delete(c.m, agentID)
+	} else {
+		cur = nil
+	}
+	c.mu.Unlock()
+	if cur != nil {
+		cur.close()
+	}
+}
+
+// GET /api/panel/ping - an empty answer for the browser to time.
+func (s *Server) handlePanelPing(w http.ResponseWriter, r *http.Request) {
+	w.Header().Set("Cache-Control", "no-store")
+	w.WriteHeader(http.StatusNoContent)
+}
+
+// POST /api/panel/agents/{id}/speed/relay - open the relay of a speed test
+// that runs through the browser. The test itself ends it.
+func (s *Server) handleSpeedRelayOpen(w http.ResponseWriter, r *http.Request) {
+	id, ok := s.onlineAgent(w, r)
+	if !ok {
+		return
+	}
+	s.relays.open(id)
+	writeJSON(w, proto.TaskResult{OK: true})
+}
+
+// POST /api/panel/agents/{id}/speed/down - a piece of the browser's upload,
+// passed on to the agent. 204 asks for the next piece, 200 says the agent has
+// stopped reading.
+func (s *Server) handleSpeedRelayFeed(w http.ResponseWriter, r *http.Request) {
+	body := http.MaxBytesReader(w, r.Body, speedUpCap)
+	rl := s.relays.get(r.PathValue("id"))
+	if rl != nil {
+		if _, err := io.Copy(rl.downW, body); err == nil {
+			w.WriteHeader(http.StatusNoContent)
+			return
+		}
+	}
+	// Take the rest of the piece before answering: an answer sent over an
+	// unread body makes Go drop the connection, which a proxy in front turns
+	// into a 502.
+	_, _ = io.Copy(io.Discard, body)
+	w.Header().Set("Cache-Control", "no-store")
+	_, _ = io.WriteString(w, "done")
+}
+
+// GET /api/panel/agents/{id}/speed/up - the agent's upload, for the browser to
+// time. Ends when the agent is done sending.
+func (s *Server) handleSpeedRelayDrain(w http.ResponseWriter, r *http.Request) {
+	id := r.PathValue("id")
+	rl := s.relays.get(id)
+	if rl == nil {
+		http.Error(w, "gone", http.StatusGone)
+		return
+	}
+	speedStreamHeaders(w)
+	_, _ = io.Copy(meterWriter{w: w, m: s.meters.get(id), up: true}, rl.upR)
+	// The browser may have left: don't let the agent keep sending to nobody.
+	rl.upR.CloseWithError(io.ErrClosedPipe)
+}
+
+// GET /api/agent/speed/relay/down - what the browser uploads, for the agent to
+// time.
+func (s *Server) handleSpeedRelayDown(w http.ResponseWriter, r *http.Request) {
+	a := s.authenticateAgent(r)
+	if a == nil {
+		http.Error(w, "unauthorized", http.StatusUnauthorized)
+		return
+	}
+	rl := s.relays.get(a.ID)
+	if rl == nil {
+		http.NotFound(w, r)
+		return
+	}
+	speedStreamHeaders(w)
+	// The agent waits on the headers, the browser may not have sent a byte yet.
+	_ = http.NewResponseController(w).Flush()
+	_, _ = io.Copy(meterWriter{w: w, m: s.meters.get(a.ID)}, rl.downR)
+	// The agent hung up at the end of its window: stop the browser's upload.
+	rl.downR.CloseWithError(io.ErrClosedPipe)
+}
+
+// POST /api/agent/speed/relay/up - the agent's upload, passed on to the browser.
+func (s *Server) handleSpeedRelayUp(w http.ResponseWriter, r *http.Request) {
+	a := s.authenticateAgent(r)
+	if a == nil {
+		http.Error(w, "unauthorized", http.StatusUnauthorized)
+		return
+	}
+	rl := s.relays.get(a.ID)
+	if rl == nil {
+		http.NotFound(w, r)
+		return
+	}
+	body := http.MaxBytesReader(w, r.Body, speedUpCap)
+	// A proxy in front may hand over the whole upload at once: pass on only
+	// what the browser takes in the window, or the agent would wait for the
+	// rest to trickle through a slower link.
+	t := time.AfterFunc(speedRelayUpFor, func() { rl.upW.Close() })
+	_, _ = io.Copy(rl.upW, body)
+	t.Stop()
+	rl.upW.Close()
+	_, _ = io.Copy(io.Discard, body)
+	w.WriteHeader(http.StatusNoContent)
+}

internal/server/handlers_panel_term.go

@@ -12,7 +12,7 @@ import (
 // same transport the agent uses), so it works through any reverse proxy without
 // WebSocket upgrade support.
 
-// POST /api/panel/term/{agentID}/open — create a terminal session.
+// POST /api/panel/term/{agentID}/open - create a terminal session.
 func (s *Server) handlePanelOpen(w http.ResponseWriter, r *http.Request) {
 	agentID := r.PathValue("agentID")
 	agent, err := s.db.GetAgent(agentID)
@@ -28,7 +28,7 @@ func (s *Server) handlePanelOpen(w http.ResponseWriter, r *http.Request) {
 	writeJSON(w, map[string]string{"session_id": sess.ID})
 }
 
-// GET /api/panel/term/{sid}/out — long-poll for PTY output.
+// GET /api/panel/term/{sid}/out - long-poll for PTY output.
 func (s *Server) handlePanelOut(w http.ResponseWriter, r *http.Request) {
 	sess := s.hub.Session(r.PathValue("sid"))
 	if sess == nil {
@@ -51,7 +51,7 @@ type panelInMsg struct {
 	Rows uint16 `json:"rows,omitempty"`
 }
 
-// POST /api/panel/term/{sid}/in — send keystrokes/resize to the agent PTY.
+// POST /api/panel/term/{sid}/in - send keystrokes/resize to the agent PTY.
 func (s *Server) handlePanelIn(w http.ResponseWriter, r *http.Request) {
 	sess := s.hub.Session(r.PathValue("sid"))
 	if sess == nil {
@@ -72,7 +72,7 @@ func (s *Server) handlePanelIn(w http.ResponseWriter, r *http.Request) {
 	w.WriteHeader(http.StatusNoContent)
 }
 
-// POST /api/panel/term/{sid}/close — tear the session down.
+// POST /api/panel/term/{sid}/close - tear the session down.
 func (s *Server) handlePanelClose(w http.ResponseWriter, r *http.Request) {
 	s.hub.CloseSession(r.PathValue("sid"))
 	w.WriteHeader(http.StatusNoContent)

internal/server/hub.go

@@ -22,6 +22,12 @@ type Hub struct {
 
 	sessions map[string]*Session
 	tasks    map[string]*taskEntry
+
+	// Presence: control polls held open right now per agent, and when each
+	// agent's last one ended. started is when this hub came up.
+	polls    map[string]int
+	lastPoll map[string]time.Time
+	started  time.Time
 }
 
 // taskEntry is a pending one-shot task awaiting the agent's result.
@@ -31,7 +37,7 @@ type taskEntry struct {
 }
 
 // Session is one live byte stream between the panel and an agent (a PTY terminal
-// or a raw TCP forward — the hub treats both identically).
+// or a raw TCP forward - the hub treats both identically).
 type Session struct {
 	ID      string
 	AgentID string
@@ -52,6 +58,9 @@ func NewHub() *Hub {
 		ctrlWaiters: map[string]chan struct{}{},
 		sessions:    map[string]*Session{},
 		tasks:       map[string]*taskEntry{},
+		polls:       map[string]int{},
+		lastPoll:    map[string]time.Time{},
+		started:     time.Now(),
 	}
 }
 
@@ -97,9 +106,56 @@ func (h *Hub) CreateForward(agentID string, port int) *Session {
 	return s
 }
 
-// WaitControl blocks until a job is queued for agentID or timeout elapses.
-func (h *Hub) WaitControl(agentID string, timeout time.Duration) proto.ControlMessage {
-	deadline := time.After(timeout)
+// pollGrace is how long an agent stays online between two control polls: it
+// re-polls at once, so this only has to cover a slow round trip or one retry.
+const pollGrace = 10 * time.Second
+
+// Online reports whether the agent is connected: it holds a control poll open
+// or has just finished one. ok is false while that cannot be told yet (right
+// after a start, before agents had time to come back).
+func (h *Hub) Online(agentID string) (online, ok bool) {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+	if h.polls[agentID] > 0 {
+		return true, true
+	}
+	if t, seen := h.lastPoll[agentID]; seen {
+		return time.Since(t) < pollGrace, true
+	}
+	return false, time.Since(h.started) > pollHold+pollGrace
+}
+
+// Forget drops what the hub keeps about a deleted agent.
+func (h *Hub) Forget(agentID string) {
+	h.mu.Lock()
+	delete(h.jobs, agentID)
+	delete(h.ctrlWaiters, agentID)
+	delete(h.lastPoll, agentID)
+	h.mu.Unlock()
+}
+
+// WaitControl blocks until a job is queued for agentID, the timeout elapses
+// or the agent hangs up (done). The agent counts as online meanwhile.
+func (h *Hub) WaitControl(done <-chan struct{}, agentID string, timeout time.Duration) proto.ControlMessage {
+	h.mu.Lock()
+	h.polls[agentID]++
+	h.mu.Unlock()
+	defer func() {
+		h.mu.Lock()
+		if h.polls[agentID]--; h.polls[agentID] <= 0 {
+			delete(h.polls, agentID)
+		}
+		// A poll cut off by the agent is not a sign of life.
+		select {
+		case <-done:
+		default:
+			h.lastPoll[agentID] = time.Now()
+		}
+		h.mu.Unlock()
+	}()
+	t := time.NewTimer(timeout)
+	defer t.Stop()
+	deadline := t.C
 	for {
 		h.mu.Lock()
 		if q := h.jobs[agentID]; len(q) > 0 {
@@ -119,6 +175,9 @@ func (h *Hub) WaitControl(agentID string, timeout time.Duration) proto.ControlMe
 		case <-w:
 		case <-deadline:
 			return proto.ControlMessage{Type: proto.CtrlIdle}
+		case <-done:
+			// The job, if one comes, stays queued for the next poll.
+			return proto.ControlMessage{Type: proto.CtrlIdle}
 		}
 	}
 }

internal/server/server.go

@@ -9,6 +9,8 @@ import (
 	"net/http"
 	"strconv"
 	"strings"
+	"sync"
+	"sync/atomic"
 	texttemplate "text/template"
 )
 
@@ -24,7 +26,8 @@ type Options struct {
 	// nginx TLS); set false only for plain-HTTP local testing.
 	SecureCookies bool
 	// TunnelAddr is the listen address for the direct TCP+UDP forward tunnel
-	// (default ":8446"). Empty disables direct forwarding.
+	// Empty disables direct forwarding. The port can be overridden from the
+	// settings page.
 	TunnelAddr string
 }
 
@@ -33,12 +36,26 @@ type Server struct {
 	db            *DB
 	hub           *Hub
 	fwd           *forwardManager
+	tun           *tunnelHub
+	udp           *udpRelay
 	ufw           *ufwManager
 	tmpl          *template.Template
 	limiter       *loginLimiter
 	distDir       string
 	secureCookies bool
 	installTmpl   *texttemplate.Template
+
+	// Direct tunnel: bind host and port of the -tunnel address, and the port
+	// currently listened on (the settings override, else the default).
+	// tunnelDefault 0 means the tunnel is disabled.
+	tunnelBind    string
+	tunnelDefault int
+	tunnelMu      sync.Mutex // serializes port changes
+	tunnelPort    atomic.Int64
+
+	stats  statCache   // last load sample per agent, for the status page
+	relays speedRelays // speed tests that run through the browser
+	meters speedMeters // byte counts of the speed tests under way
 }
 
 // New builds the server, parsing embedded templates.
@@ -65,26 +82,81 @@ func New(opts Options) (*Server, error) {
 		db:            opts.DB,
 		hub:           hub,
 		fwd:           newForwardManager(hub, tun, udp),
-		ufw:           newUfwManager(opts.DB, portFromAddr(opts.TunnelAddr)),
+		tun:           tun,
+		udp:           udp,
 		tmpl:          tmpl,
 		limiter:       newLoginLimiter(),
 		distDir:       opts.DistDir,
 		secureCookies: opts.SecureCookies,
 		installTmpl:   installTmpl,
 	}
-	// Start the direct forward tunnel (TCP mux + UDP) on 8446.
+	s.ufw = newUfwManager(opts.DB, s.TunnelPort)
+	// Start the direct forward tunnel (TCP mux + UDP), on the port from the
+	// settings page if one is set there.
 	if opts.TunnelAddr != "" {
-		if err := tun.listen(opts.TunnelAddr); err != nil {
-			log.Printf("tunnel tcp listen %s: %v", opts.TunnelAddr, err)
+		s.tunnelBind, s.tunnelDefault = splitAddr(opts.TunnelAddr)
 	}
-		if err := udp.listen(opts.TunnelAddr); err != nil {
-			log.Printf("tunnel udp listen %s: %v", opts.TunnelAddr, err)
+	if s.tunnelDefault > 0 {
+		port := s.tunnelDefault
+		if p := s.db.TunnelPort(); p > 0 {
+			port = p
+		}
+		s.tunnelPort.Store(int64(port))
+		addr := s.tunnelListenAddr(port)
+		if err := tun.listen(addr); err != nil {
+			log.Printf("tunnel tcp listen %s: %v", addr, err)
+		}
+		if err := udp.listen(addr); err != nil {
+			log.Printf("tunnel udp listen %s: %v", addr, err)
 		}
 	}
 	s.restoreForwards()
+	go s.ufw.sync()
 	return s, nil
 }
 
+// TunnelPort is the port the direct tunnel listens on (0 = disabled).
+func (s *Server) TunnelPort() int { return int(s.tunnelPort.Load()) }
+
+func (s *Server) tunnelListenAddr(port int) string {
+	return net.JoinHostPort(s.tunnelBind, strconv.Itoa(port))
+}
+
+// tunnelAdvert is the tunnel address handed to agents as "host:port". The host
+// is empty unless one is set in Settings; agents then use the panel's host.
+func (s *Server) tunnelAdvert() string {
+	port := s.TunnelPort()
+	if port == 0 {
+		return ""
+	}
+	return net.JoinHostPort(s.db.TunnelHost(), strconv.Itoa(port))
+}
+
+// setTunnelPort moves the direct tunnel to another port. Connected agents are
+// dropped and redial the new port once their next poll tells them about it.
+func (s *Server) setTunnelPort(port int) error {
+	s.tunnelMu.Lock()
+	defer s.tunnelMu.Unlock()
+	old := s.TunnelPort()
+	if old == 0 || port == old {
+		return nil
+	}
+	addr := s.tunnelListenAddr(port)
+	if err := s.tun.listen(addr); err != nil {
+		return err
+	}
+	if err := s.udp.listen(addr); err != nil {
+		// Keep TCP and UDP on the same port: go back to the old one.
+		if rerr := s.tun.listen(s.tunnelListenAddr(old)); rerr != nil {
+			log.Printf("tunnel tcp listen %s: %v", s.tunnelListenAddr(old), rerr)
+		}
+		return err
+	}
+	s.tunnelPort.Store(int64(port))
+	go s.ufw.sync()
+	return nil
+}
+
 // restoreForwards re-opens the host listeners for all saved forward rules.
 func (s *Server) restoreForwards() {
 	rules, err := s.db.ListForwardRules()
@@ -93,6 +165,12 @@ func (s *Server) restoreForwards() {
 		return
 	}
 	for _, r := range rules {
+		// Rules of an agent deleted by an older version: drop them.
+		if a, err := s.db.GetAgent(r.AgentID); err == nil && a == nil {
+			log.Printf("forward rule %d: agent %s is gone, removing", r.ID, r.AgentID)
+			s.removeForward(r.ID)
+			continue
+		}
 		if err := s.fwd.open(r); err != nil {
 			log.Printf("restore forward rule %d (%s:%d): %v", r.ID, r.ListenAddr, r.HostPort, err)
 		}
@@ -126,6 +204,7 @@ func (s *Server) Handler() http.Handler {
 	mux.Handle("GET /agents/{id}/terminal", s.requireAdmin(s.handleTerminalPage))
 	mux.Handle("GET /agents/{id}/files", s.requireAdmin(s.handleFilesPage))
 	mux.Handle("GET /agents/{id}/forwards", s.requireAdmin(s.handleForwardsPage))
+	mux.Handle("GET /agents/{id}/status", s.requireAdmin(s.handleStatusPage))
 	mux.Handle("GET /agents/{id}/edit", s.requireAdmin(s.handleAgentEdit))
 	mux.Handle("POST /agents/{id}/rename", s.requireAdmin(s.handleAgentRename))
 	mux.Handle("POST /agents/{id}/update", s.requireAdmin(s.handleAgentUpdate))
@@ -134,10 +213,12 @@ func (s *Server) Handler() http.Handler {
 	mux.Handle("POST /agents/{id}/delete", s.requireAdmin(s.handleAgentDelete))
 	mux.Handle("GET /settings", s.requireAdmin(s.handleSettings))
 	mux.Handle("POST /settings/host", s.requireAdmin(s.handleSetHost))
+	mux.Handle("POST /settings/tunnel", s.requireAdmin(s.handleSetTunnel))
 	mux.Handle("POST /settings/secret/rotate", s.requireAdmin(s.handleRotateSecret))
 	mux.Handle("POST /settings/admins/add", s.requireAdmin(s.handleAddAdmin))
 	mux.Handle("POST /settings/admins/delete", s.requireAdmin(s.handleDeleteAdmin))
 	mux.Handle("POST /settings/ufw/toggle", s.requireAdmin(s.handleUfwToggle))
+	mux.Handle("POST /settings/ufw/add", s.requireAdmin(s.handleUfwAdd))
 	mux.Handle("POST /settings/ufw/revoke", s.requireAdmin(s.handleUfwRevoke))
 
 	// Panel terminal over HTTP long-polling (admin-only).
@@ -150,6 +231,16 @@ func (s *Server) Handler() http.Handler {
 	mux.Handle("GET /api/panel/agents/{id}/fs/download", s.requireAdmin(s.handleFSDownload))
 	mux.Handle("POST /api/panel/agents/{id}/fs/{op}", s.requireAdmin(s.handleFSOp))
 
+	// Machine status (admin).
+	mux.Handle("GET /api/panel/agents/presence", s.requireAdmin(s.handlePresence))
+	mux.Handle("GET /api/panel/agents/{id}/stat", s.requireAdmin(s.handleAgentStat))
+	mux.Handle("POST /api/panel/agents/{id}/speed", s.requireAdmin(s.handleAgentSpeed))
+	mux.Handle("GET /api/panel/agents/{id}/speed/progress", s.requireAdmin(s.handleSpeedProgress))
+	mux.Handle("GET /api/panel/ping", s.requireAdmin(s.handlePanelPing))
+	mux.Handle("POST /api/panel/agents/{id}/speed/relay", s.requireAdmin(s.handleSpeedRelayOpen))
+	mux.Handle("POST /api/panel/agents/{id}/speed/down", s.requireAdmin(s.handleSpeedRelayFeed))
+	mux.Handle("GET /api/panel/agents/{id}/speed/up", s.requireAdmin(s.handleSpeedRelayDrain))
+
 	// Panel port forwarding (admin-only).
 	mux.Handle("POST /agents/{id}/forwards/add", s.requireAdmin(s.handleForwardAdd))
 	mux.Handle("POST /forwards/{rid}/delete", s.requireAdmin(s.handleForwardDelete))
@@ -157,10 +248,15 @@ func (s *Server) Handler() http.Handler {
 	// Agent API (token/secret auth inside handlers).
 	mux.HandleFunc("POST /api/agent/enroll", s.handleEnroll)
 	mux.HandleFunc("GET /api/agent/poll", s.handlePoll)
+	mux.HandleFunc("GET /api/agent/config", s.handleAgentConfig)
 	mux.HandleFunc("GET /api/agent/term/{sid}/in", s.handleTermIn)
 	mux.HandleFunc("POST /api/agent/term/{sid}/out", s.handleTermOut)
 	mux.HandleFunc("GET /api/agent/task/{id}", s.handleTaskFetch)
 	mux.HandleFunc("POST /api/agent/task/{id}/result", s.handleTaskResult)
+	mux.HandleFunc("GET /api/agent/speed/down", s.handleSpeedDown)
+	mux.HandleFunc("POST /api/agent/speed/up", s.handleSpeedUp)
+	mux.HandleFunc("GET /api/agent/speed/relay/down", s.handleSpeedRelayDown)
+	mux.HandleFunc("POST /api/agent/speed/relay/up", s.handleSpeedRelayUp)
 
 	return s.logRequests(mux)
 }
@@ -202,17 +298,15 @@ func (s *Server) render(w http.ResponseWriter, name string, data map[string]any)
 	}
 }
 
-// portFromAddr extracts the numeric port from a "host:port" or ":port" address.
-func portFromAddr(addr string) int {
-	if addr == "" {
-		return 0
-	}
-	_, p, err := net.SplitHostPort(addr)
+// splitAddr splits a "host:port" or ":port" listen address. The port is 0 when
+// the address has none.
+func splitAddr(addr string) (host string, port int) {
+	h, p, err := net.SplitHostPort(addr)
 	if err != nil {
-		return 0
+		return "", 0
 	}
 	n, _ := strconv.Atoi(p)
-	return n
+	return h, n
 }
 
 func clientIP(r *http.Request) string {

internal/server/tunnelserver.go

@@ -39,6 +39,7 @@ func readLine(r io.Reader, max int) (string, error) {
 type tunnelHub struct {
 	db     *DB
 	mu     sync.Mutex
+	ln     net.Listener
 	agents map[string]*agentTunnel
 }
 
@@ -57,12 +58,30 @@ type agentTunnel struct {
 	streams map[uint32]net.Conn
 }
 
-// listen runs the 8446 TCP tunnel acceptor until the listener closes.
+// listen runs the TCP tunnel acceptor until the listener closes. Listening
+// again moves the tunnel: the previous listener is closed and its agents are
+// dropped, so they redial the new address.
 func (h *tunnelHub) listen(addr string) error {
 	ln, err := net.Listen("tcp", addr)
 	if err != nil {
 		return err
 	}
+	h.mu.Lock()
+	old := h.ln
+	h.ln = ln
+	var stale []*agentTunnel
+	if old != nil {
+		for _, at := range h.agents {
+			stale = append(stale, at)
+		}
+	}
+	h.mu.Unlock()
+	if old != nil {
+		old.Close()
+	}
+	for _, at := range stale {
+		at.conn.Close()
+	}
 	log.Printf("tunnel: listening on %s (direct TCP forwarding)", addr)
 	go func() {
 		for {

internal/server/udp.go

@@ -11,11 +11,11 @@ import (
 	"github.com/x-grk/longpolling-remote-access/internal/tunnel"
 )
 
-// udpRelay carries UDP forwards over the direct 8446 UDP channel. The agent
+// udpRelay carries UDP forwards over the direct UDP channel. The agent
 // registers its UDP return address; end-user datagrams arriving on a rule's
 // host port are relayed to the agent and replies are sent back.
 //
-// Datagram framing on the 8446 control socket:
+// Datagram framing on the tunnel control socket:
 //
 //	registration (agent->server): "R <agentID> <sig>"
 //	data         (both):          'D' | sid(4) | port(2) | payload
@@ -23,6 +23,7 @@ type udpRelay struct {
 	db     *DB
 	mu     sync.Mutex
 	ctrl   *net.UDPConn
+	gcOnce sync.Once
 
 	agentAddr map[string]*net.UDPAddr // agentID -> last registered addr
 	sessions  map[uint32]*udpSession
@@ -48,7 +49,8 @@ func newUDPRelay(db *DB) *udpRelay {
 	}
 }
 
-// listen opens the shared 8446 UDP control socket.
+// listen opens the shared UDP control socket. Listening again moves it: the
+// previous socket is closed and agents register anew on the new address.
 func (u *udpRelay) listen(addr string) error {
 	ua, err := net.ResolveUDPAddr("udp", addr)
 	if err != nil {
@@ -58,17 +60,26 @@ func (u *udpRelay) listen(addr string) error {
 	if err != nil {
 		return err
 	}
+	u.mu.Lock()
+	old := u.ctrl
 	u.ctrl = c
+	if old != nil {
+		u.agentAddr = map[string]*net.UDPAddr{}
+	}
+	u.mu.Unlock()
+	if old != nil {
+		old.Close()
+	}
 	log.Printf("tunnel: listening on %s/udp (direct UDP forwarding)", addr)
-	go u.ctrlLoop()
-	go u.gc()
+	go u.ctrlLoop(c)
+	u.gcOnce.Do(func() { go u.gc() })
 	return nil
 }
 
-func (u *udpRelay) ctrlLoop() {
+func (u *udpRelay) ctrlLoop(ctrl *net.UDPConn) {
 	buf := make([]byte, 65535)
 	for {
-		n, src, err := u.ctrl.ReadFromUDP(buf)
+		n, src, err := ctrl.ReadFromUDP(buf)
 		if err != nil {
 			return
 		}
@@ -171,6 +182,7 @@ func (u *udpRelay) rulePortLoop(rule ForwardRule, c *net.UDPConn) {
 		}
 		u.mu.Lock()
 		aAddr := u.agentAddr[rule.AgentID]
+		ctrl := u.ctrl
 		// Find existing session for this (rule, user).
 		var sess *udpSession
 		for _, s := range u.sessions {
@@ -190,7 +202,7 @@ func (u *udpRelay) rulePortLoop(rule ForwardRule, c *net.UDPConn) {
 		sess.last = time.Now()
 		u.mu.Unlock()
 
-		if aAddr == nil {
+		if aAddr == nil || ctrl == nil {
 			continue // agent has not registered its UDP endpoint yet
 		}
 		// 'D' | sid(4) | clientPort(2) | payload
@@ -199,7 +211,7 @@ func (u *udpRelay) rulePortLoop(rule ForwardRule, c *net.UDPConn) {
 		binary.BigEndian.PutUint32(out[1:5], sess.id)
 		binary.BigEndian.PutUint16(out[5:7], uint16(rule.ClientPort))
 		copy(out[7:], buf[:n])
-		_, _ = u.ctrl.WriteToUDP(out, aAddr)
+		_, _ = ctrl.WriteToUDP(out, aAddr)
 	}
 }
 

internal/server/ufw.go

@@ -3,8 +3,11 @@ package server
 import (
 	"fmt"
 	"log"
+	"net"
+	"os"
 	"os/exec"
 	"strings"
+	"sync"
 )
 
 // ufwManager integrates with the host firewall (ufw) when it is installed and
@@ -15,30 +18,52 @@ import (
 // (e.g. running as root). When it cannot, integration is simply inactive.
 type ufwManager struct {
 	db *DB
-	tunnelPort int
+	// tunnelPort returns the current direct-tunnel port (0 = tunnel disabled).
+	tunnelPort func() int
+
+	mu      sync.Mutex
+	lastErr string // last failed ufw command, shown in Settings
 }
 
-func newUfwManager(db *DB, tunnelPort int) *ufwManager {
+func newUfwManager(db *DB, tunnelPort func() int) *ufwManager {
 	return &ufwManager{db: db, tunnelPort: tunnelPort}
 }
 
+// ufwRun runs ufw with a fixed C locale: its output is translated, and we
+// match on the English text.
+func ufwRun(args ...string) (string, error) {
+	cmd := exec.Command("ufw", args...)
+	cmd.Env = append(os.Environ(), "LC_ALL=C", "LANG=C", "LANGUAGE=C")
+	out, err := cmd.CombinedOutput()
+	return strings.TrimSpace(string(out)), err
+}
+
 // status reports whether ufw is installed, active, and runnable by this process.
 func (u *ufwManager) status() (installed, active, runnable bool) {
-	path, err := exec.LookPath("ufw")
-	if err != nil {
+	if _, err := exec.LookPath("ufw"); err != nil {
 		return false, false, false
 	}
 	installed = true
-	out, err := exec.Command(path, "status").CombinedOutput()
+	out, err := ufwRun("status")
 	if err != nil {
 		// Typically a permission error (not root) -> not runnable.
 		return true, false, false
 	}
 	runnable = true
-	active = strings.Contains(string(out), "Status: active")
+	active = strings.Contains(out, "Status: active")
 	return installed, active, runnable
 }
 
+// enabled reports whether the integration is switched on and ufw is there to
+// drive. Unlike available it runs nothing, so pages can ask it freely.
+func (u *ufwManager) enabled() bool {
+	if !u.db.UfwEnabled() {
+		return false
+	}
+	_, err := exec.LookPath("ufw")
+	return err == nil
+}
+
 // available reports whether we can and should drive ufw now.
 func (u *ufwManager) available() bool {
 	if !u.db.UfwEnabled() {
@@ -48,30 +73,70 @@ func (u *ufwManager) available() bool {
 	return installed && active && runnable
 }
 
-// allow opens port/proto in ufw (if integration is available) and records it,
-// bound to the given forward rule id (0 = shared/manual).
-func (u *ufwManager) allow(port int, proto string, ruleID int64) {
-	if !u.available() {
-		return
+func (u *ufwManager) setErr(msg string) {
+	u.mu.Lock()
+	u.lastErr = msg
+	u.mu.Unlock()
 }
+
+// LastError returns the last failed ufw command ("" when the last one worked).
+func (u *ufwManager) LastError() string {
+	u.mu.Lock()
+	defer u.mu.Unlock()
+	return u.lastErr
+}
+
+// allow opens port/proto in ufw and records it, bound to the given forward
+// rule id (0 = shared, ufwManual = added in Settings). It reports whether the
+// panel now tracks the rule. The caller has checked available().
+func (u *ufwManager) allow(port int, proto string, ruleID int64) bool {
 	if u.db.HasUfwRule(port, proto) {
-		return
+		return true
 	}
 	spec := fmt.Sprintf("%d/%s", port, proto)
-	if out, err := exec.Command("ufw", "allow", spec).CombinedOutput(); err != nil {
-		log.Printf("ufw allow %s: %v: %s", spec, err, strings.TrimSpace(string(out)))
-		return
+	out, err := ufwRun("allow", spec)
+	if err != nil {
+		log.Printf("ufw allow %s: %v: %s", spec, err, out)
+		u.setErr(fmt.Sprintf("ufw allow %s: %v: %s", spec, err, out))
+		return false
+	}
+	u.setErr("")
+	if strings.Contains(out, "Skipping") {
+		// The rule was there before the panel asked for it, so it is not ours
+		// to track (and later delete).
+		return false
 	}
 	_ = u.db.AddUfwRule(port, proto, ruleID)
 	log.Printf("ufw: allowed %s", spec)
+	return true
+}
+
+// allowManual opens a port the admin asked for in Settings. A port the panel
+// already opened for a forward or the tunnel becomes the admin's, so it stays
+// when they no longer need it. It returns the error key for the settings page
+// ("" on success).
+func (u *ufwManager) allowManual(port int, proto string) string {
+	if !u.available() {
+		return "ufw_off"
+	}
+	if !u.allow(port, proto, ufwManual) {
+		if u.LastError() != "" {
+			return "ufw_failed"
+		}
+		return "ufw_exists"
+	}
+	_ = u.db.SetUfwRuleManual(port, proto)
+	return ""
 }
 
 // revokeRule deletes one tracked ufw rule from ufw and the tracking table.
 func (u *ufwManager) revokeRule(r UfwRule) {
 	spec := fmt.Sprintf("%d/%s", r.Port, r.Proto)
-	if out, err := exec.Command("ufw", "delete", "allow", spec).CombinedOutput(); err != nil {
-		log.Printf("ufw delete allow %s: %v: %s", spec, err, strings.TrimSpace(string(out)))
+	if out, err := ufwRun("delete", "allow", spec); err != nil {
+		log.Printf("ufw delete allow %s: %v: %s", spec, err, out)
+		u.setErr(fmt.Sprintf("ufw delete allow %s: %v: %s", spec, err, out))
 	} else {
+		u.setErr("")
 		log.Printf("ufw: revoked %s", spec)
 	}
 	_ = u.db.DeleteUfwRule(r.ID)
@@ -86,8 +151,8 @@ func (u *ufwManager) revoke(id int64) {
 	u.revokeRule(*r)
 }
 
-// revokeForRule removes the ufw rules bound to a specific forward rule. The
-// shared tunnel port (rule_id 0) is left alone, since other forwards use it.
+// revokeForRule removes the ufw rules bound to a specific forward rule, and
+// the shared tunnel port once no forward needs it any more.
 func (u *ufwManager) revokeForRule(ruleID int64) {
 	rules, err := u.db.ListUfwRulesByRule(ruleID)
 	if err != nil {
@@ -96,24 +161,77 @@ func (u *ufwManager) revokeForRule(ruleID int64) {
 	for _, r := range rules {
 		u.revokeRule(r)
 	}
+	u.pruneShared()
+}
+
+// pruneShared revokes shared (rule_id 0) ufw rules that nothing uses: anything
+// but the current tunnel port, and the tunnel port itself for a protocol that
+// has no direct forward left.
+func (u *ufwManager) pruneShared() {
+	shared, err := u.db.ListUfwRulesByRule(0)
+	if err != nil || len(shared) == 0 {
+		return
+	}
+	forwards, err := u.db.ListForwardRules()
+	if err != nil {
+		return
+	}
+	used := map[string]bool{}
+	for _, f := range forwards {
+		if !f.NoUfw {
+			used[f.Proto] = true
+		}
+	}
+	port := u.tunnelPort()
+	for _, r := range shared {
+		if r.Port != port || !used[r.Proto] {
+			u.revokeRule(r)
+		}
+	}
 }
 
 // allowForward opens the host ports a forward rule needs: its host port (bound
-// to the rule so it is revoked with it) plus the shared 8446 tunnel port for
-// direct tcp/udp modes (bound to 0 — shared across rules).
+// to the rule so it is revoked with it) plus the shared tunnel port for direct
+// tcp/udp modes (bound to 0 - shared across rules). A rule made "without ufw"
+// opens nothing, so nothing is revoked with it either.
 func (u *ufwManager) allowForward(rule ForwardRule) {
-	switch rule.Proto {
-	case "udp":
-		u.allow(rule.HostPort, "udp", rule.ID)
-		if u.tunnelPort > 0 {
-			u.allow(u.tunnelPort, "udp", 0)
+	if !u.available() {
+		return
 	}
-	case "tcp":
-		u.allow(rule.HostPort, "tcp", rule.ID)
-		if u.tunnelPort > 0 {
-			u.allow(u.tunnelPort, "tcp", 0)
+	u.allowForwardPorts(rule)
 }
-	default: // http long-poll listener is TCP
-		u.allow(rule.HostPort, "tcp", rule.ID)
+
+func (u *ufwManager) allowForwardPorts(rule ForwardRule) {
+	if rule.NoUfw {
+		return
+	}
+	// "http" (long-poll) and "tcp" forwards both listen on TCP on the host.
+	hostProto, direct := "tcp", rule.Proto == "tcp"
+	if rule.Proto == "udp" {
+		hostProto, direct = "udp", true
+	}
+	// A listener bound to loopback is not reachable from outside anyway.
+	if ip := net.ParseIP(rule.ListenAddr); ip == nil || !ip.IsLoopback() {
+		u.allow(rule.HostPort, hostProto, rule.ID)
+	}
+	if port := u.tunnelPort(); direct && port > 0 {
+		u.allow(port, hostProto, 0)
 	}
 }
+
+// sync brings ufw in line with the saved forward rules: it opens what is
+// missing (rules made while ufw or the integration was off, or a tunnel port
+// that has since changed) and drops shared rules nothing uses.
+func (u *ufwManager) sync() {
+	if !u.available() {
+		return
+	}
+	forwards, err := u.db.ListForwardRules()
+	if err != nil {
+		return
+	}
+	for _, f := range forwards {
+		u.allowForwardPorts(f)
+	}
+	u.pruneShared()
+}

internal/server/web/static/app.css

@@ -10,6 +10,8 @@
   --ok: #37c871;
 }
 * { box-sizing: border-box; }
+/* The hidden attribute wins over any display set by a class. */
+[hidden] { display: none !important; }
 body {
   margin: 0;
   background: var(--bg);
@@ -34,10 +36,14 @@ header.topbar nav a:hover { color: var(--text); }
 h1 { font-size: 22px; margin: 0 0 18px; }
 h2 { font-size: 17px; margin: 0 0 14px; }
 label { display: block; margin: 12px 0 4px; color: var(--muted); font-size: 13px; }
-input[type=text], input[type=password] {
+input[type=text], input[type=password], input[type=number] {
   width: 100%; padding: 10px 12px; border-radius: 8px;
   border: 1px solid var(--border); background: #0c0f13; color: var(--text); font-size: 14px;
 }
+/* No native spinner: it is drawn light and breaks the dark field. */
+input[type=number] { -moz-appearance: textfield; appearance: textfield; }
+input[type=number]::-webkit-inner-spin-button,
+input[type=number]::-webkit-outer-spin-button { -webkit-appearance: none; margin: 0; }
 /* Sized and shaped like .btn.ghost so it lines up with the buttons next to it. */
 select {
   -webkit-appearance: none; appearance: none; cursor: pointer;
@@ -59,10 +65,24 @@ button:hover, .btn:hover { background: var(--accent-hover); text-decoration: non
 .btn.small { padding: 6px 10px; font-size: 13px; }
 .btn.icon { width: 30px; height: 30px; padding: 0; display: inline-flex;
   align-items: center; justify-content: center; font-size: 14px; line-height: 1; text-decoration: none; }
+/* Name of an icon button, shown at once on hover or keyboard focus. */
+[data-tip] { position: relative; }
+[data-tip]::after {
+  content: attr(data-tip); position: absolute; bottom: calc(100% + 6px); left: 50%;
+  transform: translateX(-50%); padding: 4px 8px; border-radius: 6px; white-space: nowrap;
+  background: #0c0f13; border: 1px solid var(--border); color: var(--text);
+  font-size: 12px; font-weight: 400; line-height: 1.4;
+  opacity: 0; visibility: hidden; pointer-events: none; z-index: 10;
+}
+[data-tip]:hover::after, [data-tip]:focus-visible::after { opacity: 1; visibility: visible; }
 .err { background: #3a1d1d; border: 1px solid #6b2b2b; color: #ffb3b3; padding: 10px 12px; border-radius: 8px; margin-bottom: 14px; font-size: 14px; }
 table { width: 100%; border-collapse: collapse; }
 th, td { text-align: left; padding: 10px 8px; border-bottom: 1px solid var(--border); font-size: 14px; }
 th { color: var(--muted); font-weight: 500; }
+.nowrap { white-space: nowrap; }
+/* Row buttons stay on one line; the column is only as wide as they need. */
+td.actions { width: 1%; white-space: nowrap; }
+td.actions .row { flex-wrap: nowrap; justify-content: flex-end; }
 .dot { display: inline-block; width: 9px; height: 9px; border-radius: 50%; margin-right: 6px; }
 .dot.on { background: var(--ok); }
 .dot.off { background: #555d6a; }
@@ -76,7 +96,31 @@ pre { padding: 12px; overflow-x: auto; font-size: 13px; white-space: pre-wrap; w
 .row { display: flex; gap: 10px; align-items: center; flex-wrap: wrap; }
 .spacer { flex: 1; }
 #terminal { width: 100%; height: calc(100vh - 150px); }
-@media (max-width: 600px) {
-  header.topbar { padding: 12px 16px; }
-  header.topbar nav a { margin-left: 12px; }
+/* Phones. A table marked .stack turns each row into a block of
+   "label: value" lines, the labels coming from data-l on the cells; a cell
+   marked .lead goes first, as the row's title. */
+@media (max-width: 640px) {
+  header.topbar { flex-wrap: wrap; gap: 6px 12px; padding: 10px 12px; }
+  header.topbar .brand { max-width: 100%; overflow: hidden; text-overflow: ellipsis; white-space: nowrap; font-size: 14px; }
+  header.topbar nav { display: flex; align-items: center; gap: 16px; max-width: 100%;
+    overflow-x: auto; white-space: nowrap; scrollbar-width: none; }
+  header.topbar nav::-webkit-scrollbar { display: none; }
+  header.topbar nav > * { margin-left: 0 !important; flex: none; }
+  .wrap { padding: 16px 12px; }
+  .card { padding: 16px; border-radius: 8px; }
+  h1 { font-size: 20px; }
+  code { word-break: break-all; }
+  /* 16px and up, or iOS zooms the page into a field on focus. */
+  input[type=text], input[type=password], input[type=number], select, textarea { font-size: 16px; }
+  table.stack thead { display: none; }
+  table.stack, table.stack tbody { display: block; }
+  table.stack tr { display: flex; flex-direction: column; gap: 2px; padding: 12px 0; border-bottom: 1px solid var(--border); }
+  table.stack tr:first-child { padding-top: 0; }
+  table.stack tr:last-child { border-bottom: 0; padding-bottom: 0; }
+  table.stack td { display: flex; justify-content: flex-start; align-items: center; gap: 0;
+    width: auto; padding: 2px 0; border: 0; text-align: right !important; overflow-wrap: anywhere; }
+  table.stack td[data-l]::before { content: attr(data-l); flex: none; margin-right: auto; padding-right: 12px; color: var(--muted); font-size: 13px; text-align: left; }
+  table.stack td.lead { order: -1; justify-content: flex-start; text-align: left !important; font-size: 16px; font-weight: 600; }
+  table.stack td.actions { width: auto; padding-top: 8px; justify-content: flex-start; }
+  table.stack td:empty { display: none; }
 }

internal/server/web/templates/dashboard.html

@@ -3,7 +3,7 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Машины — LPRA</title>
+<title>Машины - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 </head>
 <body>
@@ -21,28 +21,37 @@
   <h1>Машины-клиенты</h1>
   <div class="card">
     {{if .Agents}}
-    <table>
-      <thead><tr><th>Статус</th><th>Имя</th><th>Hostname</th><th>ОС / Арх</th><th>Активность</th><th></th></tr></thead>
+    <table class="stack">
+      <thead><tr><th>Статус</th><th>Имя</th><th>Hostname</th><th>ОС / Арх</th><th>Активность</th><th>Действия</th></tr></thead>
       <tbody>
       {{range .Agents}}
-        <tr>
-          <td><span class="dot {{if .Online}}on{{else}}off{{end}}"></span>{{if .Online}}online{{else}}offline{{end}}</td>
-          <td>{{.Name}}</td>
-          <td class="muted">{{.Hostname}}</td>
-          <td class="muted">{{.OS}}/{{.Arch}}</td>
-          <td class="muted">{{.Seen}}</td>
-          <td>
+        <tr data-agent="{{.ID}}">
+          <td class="nowrap" data-l="Статус"><span class="dot {{if .Online}}on{{else}}off{{end}}"></span><span class="state">{{if .Online}}online{{else}}offline{{end}}</span></td>
+          <td class="lead">{{.Name}}</td>
+          <td class="muted" data-l="Hostname">{{.Hostname}}</td>
+          <td class="muted nowrap" data-l="ОС / Арх">{{.OS}}/{{.Arch}}</td>
+          <td class="muted nowrap seen" data-l="Активность">{{.Seen}}</td>
+          <td class="actions">
             <div class="row" style="gap:6px">
-              <a class="btn small" href="/agents/{{.ID}}/terminal">Терминал</a>
-              <a class="btn ghost small" href="/agents/{{.ID}}/files">Файлы</a>
-              <a class="btn ghost small" href="/agents/{{.ID}}/forwards">Порты</a>
-              <a class="btn ghost small icon" href="/agents/{{.ID}}/edit" title="Изменить">
+              <a class="btn small icon" href="/agents/{{.ID}}/terminal" data-tip="Терминал" aria-label="Терминал">
+                <svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"><polyline points="4 17 10 11 4 5"/><line x1="12" y1="19" x2="20" y2="19"/></svg>
+              </a>
+              <a class="btn ghost small icon" href="/agents/{{.ID}}/files" data-tip="Файлы" aria-label="Файлы">
+                <svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"><path d="M22 19a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h5l2 3h9a2 2 0 0 1 2 2z"/></svg>
+              </a>
+              <a class="btn ghost small icon" href="/agents/{{.ID}}/forwards" data-tip="Порты" aria-label="Порты">
+                <svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"><polyline points="17 1 21 5 17 9"/><path d="M3 11V9a4 4 0 0 1 4-4h14"/><polyline points="7 23 3 19 7 15"/><path d="M21 13v2a4 4 0 0 1-4 4H3"/></svg>
+              </a>
+              <a class="btn ghost small icon" href="/agents/{{.ID}}/status" data-tip="Статус" aria-label="Статус">
+                <svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"><polyline points="22 12 18 12 15 21 9 3 6 12 2 12"/></svg>
+              </a>
+              <a class="btn ghost small icon" href="/agents/{{.ID}}/edit" data-tip="Изменить" aria-label="Изменить">
                 <svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"><path d="M12 20h9"/><path d="M16.5 3.5a2.12 2.12 0 0 1 3 3L7 19l-4 1 1-4 12.5-12.5z"/></svg>
               </a>
               <form method="post" action="/agents/{{.ID}}/delete" style="display:inline"
-                    onsubmit="return confirm('Удалить машину {{.Name}}? Сервис на ней продолжит работать, но перестанет быть виден. Чтобы снова подключиться — переустановите агента.')">
+                    onsubmit="return confirm('Удалить машину {{.Name}}? Сервис на ней продолжит работать, но перестанет быть виден. Чтобы снова подключиться - переустановите агента.')">
                 <input type="hidden" name="csrf" value="{{$.CSRF}}">
-                <button class="btn danger small icon" type="submit" title="Удалить">
+                <button class="btn danger small icon" type="submit" data-tip="Удалить" aria-label="Удалить">
                   <svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round"><path d="M3 6h18"/><path d="M8 6V4a2 2 0 0 1 2-2h4a2 2 0 0 1 2 2v2"/><path d="M19 6l-1 14a2 2 0 0 1-2 2H8a2 2 0 0 1-2-2L5 6"/><line x1="10" y1="11" x2="10" y2="17"/><line x1="14" y1="11" x2="14" y2="17"/></svg>
                 </button>
               </form>
@@ -54,9 +63,42 @@
     </table>
     {{else}}
       <p class="muted">Пока нет подключённых машин. Добавьте первую в разделе
-        <a href="/settings">Настройки</a> — там одна команда для установки.</p>
+        <a href="/settings">Настройки</a> - там одна команда для установки.</p>
     {{end}}
   </div>
 </div>
+<script>
+// Keep the status column live; nothing is asked while the tab is hidden.
+(function () {
+  var rows = {};
+  document.querySelectorAll('tr[data-agent]').forEach(function (tr) { rows[tr.dataset.agent] = tr; });
+  var timer = null, busy = false;
+  function schedule() {
+    clearTimeout(timer);
+    if (!document.hidden) timer = setTimeout(load, 5000);
+  }
+  function load() {
+    if (busy || document.hidden) return;
+    busy = true;
+    fetch('/api/panel/agents/presence', {credentials: 'same-origin'})
+      .then(function (r) { return r.ok ? r.json() : []; })
+      .then(function (list) {
+        list.forEach(function (a) {
+          var tr = rows[a.id];
+          if (!tr) return;
+          tr.querySelector('.dot').className = 'dot ' + (a.online ? 'on' : 'off');
+          tr.querySelector('.state').textContent = a.online ? 'online' : 'offline';
+          tr.querySelector('.seen').textContent = a.seen;
+        });
+      })
+      .catch(function () {})
+      .then(function () { busy = false; schedule(); });
+  }
+  document.addEventListener('visibilitychange', function () {
+    if (document.hidden) clearTimeout(timer); else load();
+  });
+  if (Object.keys(rows).length) schedule();
+})();
+</script>
 </body>
 </html>

internal/server/web/templates/edit.html

@@ -3,7 +3,7 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Изменить машину — LPRA</title>
+<title>Изменить машину - LPRA</title>
 <link rel="stylesheet" href="/static/app.css?v={{.ServerVersion}}-2">
 </head>
 <body>
@@ -11,6 +11,10 @@
   <div class="brand">LPRA · Изменить машину</div>
   <nav>
     <a href="/">← Машины</a>
+    <a href="/agents/{{.Agent.ID}}/terminal">Терминал</a>
+    <a href="/agents/{{.Agent.ID}}/files">Файлы</a>
+    <a href="/agents/{{.Agent.ID}}/forwards">Порты</a>
+    <a href="/agents/{{.Agent.ID}}/status">Статус</a>
   </nav>
 </header>
 <div class="wrap">
@@ -55,7 +59,7 @@
       <label style="color:var(--text); font-size:14px">
         <input type="checkbox" name="sudo" value="1"> Добавить в sudo
       </label>
-      <p class="muted" style="font-size:13px">Без пароля вход по паролю (и sudo) для него работать не будет — только терминал из панели.</p>
+      <p class="muted" style="font-size:13px">Без пароля вход по паролю (и sudo) для него работать не будет - только терминал из панели.</p>
       <button type="submit">Создать пользователя</button>
     </form>
     {{else}}
@@ -64,7 +68,7 @@
     {{else if .UsersErr}}
     <p class="muted" style="font-size:13px">Список пользователей недоступен: {{.UsersErr}}.</p>
     {{else}}
-    <p class="muted" style="font-size:13px">Машина офлайн — сменить пользователя можно, когда она на связи.</p>
+    <p class="muted" style="font-size:13px">Машина офлайн - сменить пользователя можно, когда она на связи.</p>
     {{end}}
   </div>
 
@@ -90,7 +94,7 @@
   <div class="card">
     <h2>Удаление</h2>
     <p class="muted">Удаляет машину из панели. Сервис на самой машине продолжит работать,
-      но перестанет быть виден; чтобы подключиться снова — переустановите агента.</p>
+      но перестанет быть виден; чтобы подключиться снова - переустановите агента.</p>
     <form method="post" action="/agents/{{.Agent.ID}}/delete"
           onsubmit="return confirm('Удалить машину {{.Agent.Name}}?')">
       <input type="hidden" name="csrf" value="{{.CSRF}}">

internal/server/web/templates/files.html

@@ -3,7 +3,7 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Файлы · {{.Agent.Name}} — LPRA</title>
+<title>Файлы · {{.Agent.Name}} - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 <style>
   .fm-bar { display:flex; gap:8px; align-items:center; flex-wrap:wrap; margin-bottom:12px; }
@@ -27,6 +27,20 @@
   .ic { display:inline-block; width:18px; text-align:center; margin-right:6px; }
   .sz { color:var(--muted); font-variant-numeric:tabular-nums; }
   .act { display:flex; gap:6px; justify-content:flex-end; }
+  table.fm .c-sz { width:120px; }
+  table.fm .c-mt { width:160px; }
+  table.fm .c-act { width:160px; }
+  .fm .nm { overflow-wrap:anywhere; }
+  /* Phones: no date column, and the row buttons only as wide as they are. */
+  @media (max-width: 640px) {
+    table.fm .c-mt, table.fm td.mt { display:none; }
+    table.fm .c-sz { width:auto; white-space:nowrap; }
+    table.fm .c-act { width:1%; }
+    table.fm td, table.fm th { padding:7px 4px; }
+    .ic { margin-right:4px; }
+    .fm-bar input.fm-path { flex:1 1 100%; order:-1; }
+    textarea#edit { font-size:13px; }
+  }
   dialog { background:var(--panel); color:var(--text); border:1px solid var(--border);
            border-radius:12px; padding:0; max-width:900px; width:92vw; }
   dialog::backdrop { background:rgba(0,0,0,.6); }
@@ -44,11 +58,13 @@
 </head>
 <body>
 <header class="topbar">
-  <div class="brand">LPRA · Файлы — {{.Agent.Name}} <span class="muted">({{.Agent.Hostname}})</span></div>
+  <div class="brand">LPRA · Файлы - {{.Agent.Name}} <span class="muted">({{.Agent.Hostname}})</span></div>
   <nav>
     <a href="/">← Машины</a>
     <a href="/agents/{{.Agent.ID}}/terminal">Терминал</a>
     <a href="/agents/{{.Agent.ID}}/forwards">Порты</a>
+    <a href="/agents/{{.Agent.ID}}/status">Статус</a>
+    <a href="/agents/{{.Agent.ID}}/edit">Изменить</a>
   </nav>
 </header>
 <div class="wrap" style="max-width:1100px">
@@ -72,13 +88,13 @@
     <table class="fm">
       <thead><tr>
         <th style="width:28px"><input type="checkbox" id="all"></th>
-        <th>Имя</th><th style="width:120px" class="sz">Размер</th>
-        <th style="width:160px" class="sz">Изменён</th><th style="width:160px"></th>
+        <th>Имя</th><th class="sz c-sz">Размер</th>
+        <th class="sz c-mt">Изменён</th><th class="c-act"></th>
       </tr></thead>
       <tbody id="list"></tbody>
     </table>
   </div>
-  <p class="muted" id="hint" style="font-size:13px">Перетащите файлы сюда для загрузки. Клик по файлу — просмотр (правка, если &lt; 2 КБ).</p>
+  <p class="muted" id="hint" style="font-size:13px">Перетащите файлы сюда для загрузки. Клик по файлу - просмотр и правка.</p>
 </div>
 
 <dialog id="viewer">
@@ -107,7 +123,7 @@
     }).then(r => r.json()).catch(e => ({ok:false, error:'ошибка сети'})).finally(() => setBusy(false));
   };
 
-  const EDIT_LIMIT = 5 * 1024 * 1024;
+  const EDIT_LIMIT = {{.EditLimit}};
 
   // Monochrome inline icons (inherit button color via currentColor).
   const SVG = '<svg width="15" height="15" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round">';
@@ -154,8 +170,8 @@
       tr.innerHTML =
         '<td><input type="checkbox" class="ck" data-n="'+encodeURIComponent(e.name)+'"></td>' +
         '<td class="nm"><span class="ic">'+(e.is_dir?'📁':'📄')+'</span>'+esc(e.name)+'</td>' +
-        '<td class="sz">'+(e.is_dir?'':fmtSize(e.size))+'</td>' +
-        '<td class="sz">'+fmtTime(e.mtime)+'</td>' +
+        '<td class="sz c-sz">'+(e.is_dir?'':fmtSize(e.size))+'</td>' +
+        '<td class="sz mt">'+fmtTime(e.mtime)+'</td>' +
         '<td><div class="act">' +
           (isZip?'<button class="btn ghost small" data-act="unzip">unzip</button>':'') +
           (e.is_dir?'':'<a class="btn ghost small icon" title="Скачать" href="'+dlHref+'" download>'+ICON_DL+'</a>') +
@@ -190,10 +206,10 @@
       msg.textContent = 'Размер: '+fmtSize(d.size);
     } else {
       ta.value = new TextDecoder().decode(b64ToBytes(d.content));
-      const editable = d.size < EDIT_LIMIT && !d.truncated;
+      const editable = d.size <= EDIT_LIMIT && !d.truncated;
       ta.readOnly = !editable;
       save.style.display = editable ? '' : 'none';
-      msg.textContent = 'Размер: '+fmtSize(d.size) + (d.truncated?' · показано первые 5 МБ':'') + (editable?' · редактируемо':' · только чтение (≥ 5 МБ)');
+      msg.textContent = 'Размер: '+fmtSize(d.size) + (d.truncated?' · показано первые '+fmtSize(EDIT_LIMIT):'') + (editable?' · редактируемо':' · только чтение (больше '+fmtSize(EDIT_LIMIT)+')');
       save.onclick = async () => {
         const bytes = new TextEncoder().encode(ta.value);
         const w = await api('write', {path: join(cwd, e.name), data: bytesToB64(bytes)});
@@ -280,7 +296,15 @@
   ['dragleave','drop'].forEach(x => drop.addEventListener(x, e => { e.preventDefault(); if(x!=='drop')drop.classList.remove('drag'); }));
   drop.addEventListener('drop', e => { drop.classList.remove('drag'); if (e.dataTransfer.files.length) uploadFiles(e.dataTransfer.files); });
 
-  load('/');
+  // Start in the home directory of the machine's user; an agent too old to
+  // know "~" fails that listing, so fall back to the root.
+  (async () => {
+    const r = await api('list', {path: '~' + {{.Agent.LoginUser}}});
+    if (!r.ok) { load('/'); return; }
+    cwd = r.data.path; entries = r.data.entries || []; selected.clear();
+    $('path').value = cwd;
+    render();
+  })();
 })();
 </script>
 </body>

internal/server/web/templates/forwards.html

@@ -3,49 +3,69 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Порты · {{.Agent.Name}} — LPRA</title>
+<title>Порты · {{.Agent.Name}} - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 <style>
-  .frow { display:flex; align-items:flex-end; gap:14px; flex-wrap:wrap; }
-  .frow label { margin:0 0 6px; }
-  .frow .fld { display:flex; flex-direction:column; }
-  .frow select, .frow input, .frow button {
+  /* One line: fixed narrow fields, the label takes what is left. */
+  .frow { display:flex; align-items:flex-end; gap:12px; flex-wrap:wrap; }
+  .frow label { margin:0 0 6px; white-space:nowrap; }
+  .frow .fld { display:flex; flex-direction:column; flex:none; width:108px; }
+  .frow .fld.addr { width:128px; }
+  .frow .fld.grow { flex:1; width:auto; min-width:150px; }
+  .frow select, .frow input[type=text], .frow button {
     height:40px; box-sizing:border-box; font-size:14px; line-height:1; margin:0;
   }
-  .frow select {
-    padding:0 32px 0 12px; border-radius:8px; border:1px solid var(--border);
-    background:#0c0f13; color:var(--text);
+  .frow select { min-width:0; width:100%; padding:0 30px 0 12px; background-position:right 10px center; }
+  /* The ufw switch hangs under the button, centred on it, level with the note. */
+  .frow .act { position:relative; }
+  .frow .act label.check {
+    position:absolute; top:100%; left:50%; transform:translateX(-50%);
+    display:inline-flex; align-items:center; gap:8px; height:20px; margin:12px 0 0;
+    color:var(--text); font-size:14px; cursor:pointer;
+  }
+  .under { min-height:20px; margin:12px 110px 0 0; font-size:13px; line-height:20px; }
+  /* Phones: two fields a line, the label and the button each a line of their own. */
+  @media (max-width: 640px) {
+    .frow .fld, .frow .fld.addr { width:calc(50% - 6px); }
+    .frow .fld.grow { flex:1 1 100%; }
+    .frow .act { display:flex; align-items:center; gap:16px; width:100%; }
+    .frow .act button { flex:1; }
+    .frow .act label.check { position:static; transform:none; margin:0; }
+    .under { margin-right:0; }
   }
 </style>
 </head>
 <body>
 <header class="topbar">
-  <div class="brand">LPRA · Порты — {{.Agent.Name}} <span class="muted">({{.Agent.Hostname}})</span></div>
+  <div class="brand">LPRA · Порты - {{.Agent.Name}} <span class="muted">({{.Agent.Hostname}})</span></div>
   <nav>
     <a href="/">← Машины</a>
     <a href="/agents/{{.Agent.ID}}/terminal">Терминал</a>
     <a href="/agents/{{.Agent.ID}}/files">Файлы</a>
+    <a href="/agents/{{.Agent.ID}}/status">Статус</a>
+    <a href="/agents/{{.Agent.ID}}/edit">Изменить</a>
   </nav>
 </header>
 <div class="wrap">
   <h1>Проброс портов</h1>
   <p class="muted">Порт сервиса на машине-клиенте становится доступен на порту хоста.
-    Клиент за NAT — трафик идёт исходящим подключением агента.</p>
+    Клиент за NAT - трафик идёт исходящим подключением агента.</p>
   {{if .Error}}<div class="err">{{.Error}}</div>{{end}}
 
   <div class="card">
     <h2>Правила</h2>
     {{if .Rules}}
-    <table>
-      <thead><tr><th>Тип</th><th>Хост (порт)</th><th>→ Клиент (порт)</th><th>Слушать на</th><th></th></tr></thead>
+    <table class="stack">
+      <thead><tr><th>Тип</th><th>Хост (порт)</th><th>→ Клиент (порт)</th><th>Слушать на</th><th>Метка</th><th></th></tr></thead>
       <tbody>
       {{range .Rules}}
         <tr>
-          <td><code>{{.Proto}}</code></td>
-          <td class="muted">:{{.HostPort}}</td>
-          <td class="muted">127.0.0.1:{{.ClientPort}}</td>
-          <td class="muted">{{.ListenAddr}}</td>
-          <td style="text-align:right">
+          <td data-l="Тип"><code>{{.Proto}}</code></td>
+          <td class="muted" data-l="Хост">:{{.HostPort}}</td>
+          <td class="muted" data-l="→ Клиент">127.0.0.1:{{.ClientPort}}</td>
+          <td class="muted" data-l="Слушать на">{{.ListenAddr}}{{if and .NoUfw $.UfwEnabled}} · без ufw{{end}}</td>
+          <td class="lead">{{.Label}}</td>
+          <td class="actions" style="text-align:right">
             <form method="post" action="/forwards/{{.ID}}/delete" style="display:inline"
                   onsubmit="return confirm('Удалить правило?')">
               <input type="hidden" name="csrf" value="{{$.CSRF}}">
@@ -69,44 +89,55 @@
         <div class="fld">
           <label>Тип</label>
           <select name="proto" id="proto">
-            <option value="http">http (long-poll, работает везде)</option>
-            <option value="tcp">tcp (прямой, низкая задержка, порт 8446)</option>
-            <option value="udp">udp (прямой, порт 8446)</option>
+            <option value="http">http-lp</option>
+            <option value="tcp">tcp</option>
+            <option value="udp">udp</option>
           </select>
         </div>
         <div class="fld">
-          <label>Порт на клиенте</label>
-          <input type="text" name="client_port" placeholder="напр. 22" style="max-width:140px" required>
+          <label>Порт клиента</label>
+          <input type="text" name="client_port" placeholder="22" required>
         </div>
         <div class="fld">
-          <label>Порт на хосте</label>
-          <input type="text" name="host_port" placeholder="напр. 2222" style="max-width:140px" required>
+          <label>Порт хоста</label>
+          <input type="text" name="host_port" placeholder="2222" required>
         </div>
-        <div class="fld">
-          <label>Слушать на хосте</label>
-          <input type="text" name="listen_addr" value="0.0.0.0" style="max-width:160px">
+        <div class="fld addr">
+          <label>Слушать на</label>
+          <input type="text" name="listen_addr" value="0.0.0.0">
         </div>
+        <div class="fld grow">
+          <label>Метка</label>
+          <input type="text" name="label" maxlength="80" placeholder="необязательно">
+        </div>
+        <div class="act">
           <button type="submit">Создать</button>
+          {{if .UfwEnabled}}
+          <label class="check" title="Порт не будет открыт в ufw, и при удалении правила в ufw ничего не изменится">
+            <input type="checkbox" name="no_ufw" value="1"> Без ufw
+          </label>
+          {{end}}
         </div>
+      </div>
+      <div class="under"><span class="muted" id="note"></span></div>
     </form>
-    <p class="muted" id="note" style="font-size:13px; margin-top:12px"></p>
   </div>
 
   <div class="card">
     <h2>Режимы</h2>
     <ul class="muted" style="font-size:14px; line-height:1.7">
-      <li><b>http</b> — туннель поверх HTTP long-poll (через nginx :8445). Работает везде, где доступна панель, но задержка выше.</li>
-      <li><b>tcp</b> — прямой TCP-мультиплексор через порт <b>8446</b> хоста. Минимальная задержка, keep-alive, TCP_NODELAY. Нужно открыть 8446/tcp на хосте.</li>
-      <li><b>udp</b> — прямой UDP через порт <b>8446</b> хоста. Нужно открыть 8446/udp.</li>
+      <li><b>http-lp</b> - туннель поверх HTTP long-poll (через адрес панели, порт {{.PanelPort}}). Работает везде, где доступна панель, но задержка выше.</li>
+      <li><b>tcp</b> - прямой TCP-мультиплексор через порт <b>{{.TunnelPort}}</b> хоста. Минимальная задержка, keep-alive, TCP_NODELAY. Нужно открыть {{.TunnelPort}}/tcp на хосте.</li>
+      <li><b>udp</b> - прямой UDP через порт <b>{{.TunnelPort}}</b> хоста. Нужно открыть {{.TunnelPort}}/udp.</li>
     </ul>
-    <p class="muted" style="font-size:13px">Для tcp/udp агент держит исходящее соединение к <code>host:8446</code>; несколько клиентов и портов мультиплексируются на нём.</p>
+    <p class="muted" style="font-size:13px">Для tcp/udp агент держит исходящее соединение к <code>host:{{.TunnelPort}}</code>; несколько клиентов и портов мультиплексируются на нём.</p>
   </div>
 </div>
 <script>
   var notes = {
-    http: 'Трафик идёт через :8445 (long-poll). Порт 8446 не требуется.',
-    tcp:  'Требуется открытый порт 8446/tcp на хосте. Самая низкая задержка.',
-    udp:  'Требуется открытый порт 8446/udp на хосте.'
+    http: 'Трафик идёт через порт панели {{.PanelPort}} (long-poll). Порт {{.TunnelPort}} не требуется.',
+    tcp:  'Требуется открытый порт {{.TunnelPort}}/tcp на хосте. Самая низкая задержка.',
+    udp:  'Требуется открытый порт {{.TunnelPort}}/udp на хосте.'
   };
   var sel = document.getElementById('proto'), note = document.getElementById('note');
   function upd(){ note.textContent = notes[sel.value] || ''; }

internal/server/web/templates/login.html

@@ -3,7 +3,7 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Вход — LPRA</title>
+<title>Вход - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 </head>
 <body>

internal/server/web/templates/settings.html

@@ -3,7 +3,7 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Настройки — LPRA</title>
+<title>Настройки - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 </head>
 <body>
@@ -19,6 +19,7 @@
 </header>
 <div class="wrap">
   <h1>Настройки</h1>
+  {{if .Error}}<div class="err">{{.Error}}</div>{{end}}
 
   <div class="card">
     <h2>Установка на новую машину</h2>
@@ -49,6 +50,26 @@
     </form>
   </div>
 
+  <div class="card">
+    <h2>Прямой туннель (tcp/udp проброс)</h2>
+    {{if not .TunnelDefault}}
+      <p class="muted">Прямой туннель отключён при запуске сервера (пустой <code>-tunnel</code> / <code>LPRA_TUNNEL_ADDR</code>).</p>
+    {{else}}
+      <p class="muted">Адрес, к которому агенты подключаются для проброса в режимах tcp/udp. Агенты забирают его
+        с панели сами - при подключении и при каждом опросе, так что смена применяется без переустановки.
+        Хост можно оставить пустым (тогда берётся хост из адреса панели) или указать IP/другое имя.</p>
+      <form method="post" action="/settings/tunnel" class="row">
+        <input type="hidden" name="csrf" value="{{.CSRF}}">
+        <input type="text" name="tunnel_host" value="{{.TunnelHost}}" placeholder="хост (как у панели)" style="max-width:260px">
+        <input type="number" name="tunnel_port" min="1" max="65535" value="{{if .TunnelCustom}}{{.TunnelPort}}{{end}}" placeholder="{{.TunnelDefault}}" style="max-width:120px">
+        <button type="submit">Сохранить</button>
+      </form>
+      <p class="muted" style="font-size:13px">Сейчас сервер слушает порт <b>{{.TunnelPort}}</b> (tcp и udp). При смене порта сервер
+        сразу начинает слушать новый, агенты переподключаются в течение ~30 секунд, правило ufw переносится.
+        Агенты старше 0.0.3 и агенты с заданными <code>TUNNEL_ADDR</code>/<code>TUNNEL_PORT</code> адрес с панели не берут.</p>
+    {{end}}
+  </div>
+
   <div class="card">
     <h2>Enroll-секрет</h2>
     <p class="muted">Общий секрет для регистрации новых агентов.</p>
@@ -94,7 +115,7 @@
   <div class="card">
     <h2>Firewall (ufw)</h2>
     {{if not .UfwInstalled}}
-      <p class="muted">ufw не установлен на хосте — интеграция недоступна.</p>
+      <p class="muted">ufw не установлен на хосте - интеграция недоступна.</p>
     {{else if not .UfwRunnable}}
       <p class="muted">ufw установлен, но сервер не может им управлять (нужны права root).
         Запустите сервер под root или настройте sudo для ufw.</p>
@@ -103,7 +124,8 @@
         Статус ufw: {{if .UfwActive}}<span style="color:var(--ok)">активен</span>{{else}}<span style="color:var(--danger)">выключен</span>{{end}}
         · Интеграция: {{if .UfwEnabled}}<span style="color:var(--ok)">включена</span>{{else}}<span class="muted">выключена</span>{{end}}
       </p>
-      <p class="muted" style="font-size:13px">При создании правила проброса порт открывается в ufw автоматически (для tcp/udp — также порт 8446).</p>
+      <p class="muted" style="font-size:13px">При создании правила проброса порт открывается в ufw автоматически (для tcp/udp - также порт туннеля{{if .TunnelPort}} {{.TunnelPort}}{{end}}); для http-проброса открывается tcp-порт хоста. Порты правил, слушающих только 127.0.0.1, не открываются.</p>
+      {{if .UfwError}}<div class="err">Последняя команда ufw завершилась ошибкой: <code>{{.UfwError}}</code></div>{{end}}
       <form method="post" action="/settings/ufw/toggle" style="display:inline">
         <input type="hidden" name="csrf" value="{{.CSRF}}">
         <input type="hidden" name="enabled" value="{{if .UfwEnabled}}0{{else}}1{{end}}">
@@ -119,6 +141,7 @@
         {{range .UfwRules}}
           <tr>
             <td><code>{{.Port}}/{{.Proto}}</code></td>
+            <td class="muted">{{if .Manual}}вручную{{else if .RuleID}}проброс{{else}}туннель{{end}}</td>
             <td style="text-align:right">
               <form method="post" action="/settings/ufw/revoke" style="display:inline"
                     onsubmit="return confirm('Отменить правило ufw {{.Port}}/{{.Proto}}?')">
@@ -134,6 +157,20 @@
       {{else}}
       <p class="muted" style="font-size:13px; margin-top:10px">Панель пока не открывала портов в ufw.</p>
       {{end}}
+
+      {{if and .UfwActive .UfwEnabled}}
+      <h2 style="margin-top:18px; font-size:15px">Открыть порт вручную</h2>
+      <form method="post" action="/settings/ufw/add" class="row">
+        <input type="hidden" name="csrf" value="{{.CSRF}}">
+        <input type="number" name="port" min="1" max="65535" placeholder="порт" style="max-width:120px" required>
+        <select name="proto" style="max-width:100px">
+          <option value="tcp">tcp</option>
+          <option value="udp">udp</option>
+        </select>
+        <button type="submit">Открыть</button>
+      </form>
+      <p class="muted" style="font-size:13px">Такое правило не привязано к пробросу и остаётся, пока его не отменить здесь.</p>
+      {{end}}
     {{end}}
   </div>
 

internal/server/web/templates/setup.html

@@ -3,7 +3,7 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Настройка — LPRA</title>
+<title>Настройка - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 </head>
 <body>

internal/server/web/templates/status.html

@@ -0,0 +1,346 @@
+<!doctype html>
+<html lang="ru">
+<head>
+<meta charset="utf-8">
+<meta name="viewport" content="width=device-width, initial-scale=1">
+<title>Статус · {{.Agent.Name}} - LPRA</title>
+<link rel="stylesheet" href="/static/app.css">
+<style>
+  .meters { display:grid; grid-template-columns:repeat(auto-fit, minmax(240px, 1fr)); gap:20px; margin-bottom:20px; }
+  .meters .card { margin:0; }
+  .meter .head { display:flex; align-items:baseline; justify-content:space-between; }
+  .meter .name { color:var(--muted); font-size:13px; }
+  .meter .val { font-size:26px; font-weight:600; font-variant-numeric:tabular-nums; }
+  .meter .sub { color:var(--muted); font-size:13px; margin-top:8px; min-height:20px; font-variant-numeric:tabular-nums; }
+  .bar { height:8px; border-radius:4px; background:#0c0f13; border:1px solid var(--border); overflow:hidden; margin-top:10px; }
+  .bar i { display:block; height:100%; width:100%; background:var(--accent); transform-origin:left; transform:scaleX(0); transition:transform .4s; }
+  .bar i.warn { background:#e6a23c; }
+  .bar i.crit { background:var(--danger); }
+  .speed { display:flex; gap:28px; flex-wrap:wrap; margin-top:16px; }
+  .speed b { display:block; font-size:20px; font-variant-numeric:tabular-nums; }
+  .speed span { color:var(--muted); font-size:13px; }
+  .live { display:flex; align-items:center; gap:28px; flex-wrap:wrap; margin-top:20px; }
+  .gauge { position:relative; width:240px; flex:none; }
+  .gauge svg { display:block; width:100%; }
+  .gauge path { fill:none; stroke-width:14; stroke-linecap:round; }
+  .gauge .track { stroke:#0c0f13; }
+  .gauge .fill { stroke:var(--accent); stroke-dasharray:251.4; stroke-dashoffset:251.4; transition:stroke-dashoffset .25s linear, stroke .3s; }
+  .gauge .num { position:absolute; left:0; right:0; bottom:26px; text-align:center; font-size:38px; font-weight:600; line-height:1; font-variant-numeric:tabular-nums; }
+  .gauge .unit { position:absolute; left:0; right:0; bottom:4px; text-align:center; color:var(--muted); font-size:13px; }
+  .live .side { flex:1; min-width:220px; }
+  .live .phase { font-size:15px; margin-bottom:8px; }
+  .live .phase i { font-style:normal; color:var(--accent); margin-right:6px; }
+  .live.up .phase i { color:var(--ok); }
+  .live.up .gauge .fill { stroke:var(--ok); }
+  .spark { display:block; width:100%; height:64px; }
+  .spark polyline { fill:none; stroke:var(--accent); stroke-width:2; vector-effect:non-scaling-stroke; stroke-linejoin:round; }
+  .spark polygon { fill:var(--accent); opacity:.15; }
+  .live.up .spark polyline { stroke:var(--ok); }
+  .live.up .spark polygon { fill:var(--ok); }
+  label.check { display:inline-flex; align-items:center; gap:8px; margin:0; color:var(--text); font-size:14px; cursor:pointer; }
+</style>
+</head>
+<body>
+<header class="topbar">
+  <div class="brand">LPRA · Статус - {{.Agent.Name}} <span class="muted">({{.Agent.Hostname}})</span></div>
+  <nav>
+    <a href="/">← Машины</a>
+    <a href="/agents/{{.Agent.ID}}/terminal">Терминал</a>
+    <a href="/agents/{{.Agent.ID}}/files">Файлы</a>
+    <a href="/agents/{{.Agent.ID}}/forwards">Порты</a>
+    <a href="/agents/{{.Agent.ID}}/edit">Изменить</a>
+  </nav>
+</header>
+<div class="wrap">
+  <h1>Статус</h1>
+  <div class="err" id="err" hidden></div>
+
+  <div class="meters">
+    <div class="card meter">
+      <div class="head"><span class="name">Процессор</span><span class="val" id="cpu-val">-</span></div>
+      <div class="bar"><i id="cpu-bar"></i></div>
+      <div class="sub" id="cpu-sub"></div>
+    </div>
+    <div class="card meter">
+      <div class="head"><span class="name">Оперативная память</span><span class="val" id="mem-val">-</span></div>
+      <div class="bar"><i id="mem-bar"></i></div>
+      <div class="sub" id="mem-sub"></div>
+    </div>
+    <div class="card meter">
+      <div class="head"><span class="name">Диск (/)</span><span class="val" id="disk-val">-</span></div>
+      <div class="bar"><i id="disk-bar"></i></div>
+      <div class="sub" id="disk-sub"></div>
+    </div>
+  </div>
+
+  <div class="card">
+    <h2>Скорость соединения</h2>
+    <p class="muted">Клиент замеряет свой канал до хоста панели - тот же, по которому идут терминал, файлы и http-проброс.
+      С галочкой «До браузера» данные идут дальше, через панель до этого браузера и обратно: так виден весь путь клиент - панель - браузер.
+      Замер занимает около 15 секунд, не дольше 40, и на это время нагружает канал.</p>
+    <div class="row">
+      <button id="speed-btn" type="button">Замерить скорость</button>
+      <label class="check" title="Данные пойдут не только между клиентом и хостом панели, а через панель до этого браузера и обратно">
+        <input type="checkbox" id="speed-relay"> До браузера
+      </label>
+      <span class="muted" id="speed-note"></span>
+    </div>
+    <div class="live" id="live" hidden>
+      <div class="gauge">
+        <svg viewBox="0 0 200 110">
+          <path class="track" d="M20 100 A80 80 0 0 1 180 100"/>
+          <path class="fill" id="lv-arc" d="M20 100 A80 80 0 0 1 180 100"/>
+        </svg>
+        <div class="num" id="lv-num">-</div>
+        <div class="unit" id="lv-unit"></div>
+      </div>
+      <div class="side">
+        <div class="phase"><i id="lv-ico"></i><span id="lv-phase"></span></div>
+        <svg class="spark" viewBox="0 0 100 100" preserveAspectRatio="none">
+          <polygon id="lv-area" points=""/>
+          <polyline id="lv-line" points=""/>
+        </svg>
+      </div>
+    </div>
+    <div class="speed" id="speed" hidden>
+      <div><b id="sp-ping"></b><span>задержка</span></div>
+      <div><b id="sp-down"></b><span id="sp-down-lbl"></span></div>
+      <div><b id="sp-up"></b><span id="sp-up-lbl"></span></div>
+    </div>
+  </div>
+</div>
+<script>
+(function () {
+  var base = '/api/panel/agents/' + encodeURIComponent({{.Agent.ID}});
+  var $ = function (id) { return document.getElementById(id); };
+  var errBox = $('err');
+
+  function size(n) {
+    var u = ['Б', 'КБ', 'МБ', 'ГБ', 'ТБ'], i = 0;
+    while (n >= 1024 && i < u.length - 1) { n /= 1024; i++; }
+    return n.toFixed(n < 10 && i > 0 ? 1 : 0) + ' ' + u[i];
+  }
+  function rateParts(bps) {
+    var u = ['бит/с', 'Кбит/с', 'Мбит/с', 'Гбит/с'], i = 0;
+    while (bps >= 1000 && i < u.length - 1) { bps /= 1000; i++; }
+    return [bps.toFixed(bps < 100 && i > 0 ? 1 : 0), u[i]];
+  }
+  function rate(bps) { return rateParts(bps).join(' '); }
+  function meter(name, pct, sub) {
+    pct = Math.max(0, Math.min(100, pct));
+    $(name + '-val').textContent = Math.round(pct) + '%';
+    var bar = $(name + '-bar');
+    bar.style.transform = 'scaleX(' + pct / 100 + ')';
+    bar.className = pct >= 90 ? 'crit' : pct >= 75 ? 'warn' : '';
+    $(name + '-sub').textContent = sub;
+  }
+  function showErr(msg) {
+    errBox.textContent = msg || '';
+    errBox.hidden = !msg;
+  }
+  function cores(n) {
+    var d = n % 10, h = n % 100;
+    return n + (d === 1 && h !== 11 ? ' ядро' : d >= 2 && d <= 4 && (h < 12 || h > 14) ? ' ядра' : ' ядер');
+  }
+
+  // One request at a time, and none while the tab is hidden: the client is
+  // sampled only for a page somebody is looking at.
+  var timer = null, busy = false;
+  function schedule(ms) {
+    clearTimeout(timer);
+    if (!document.hidden) timer = setTimeout(load, ms);
+  }
+  function load() {
+    if (busy || document.hidden) return;
+    busy = true;
+    var next = 3000;
+    fetch(base + '/stat', {credentials: 'same-origin'})
+      .then(function (r) { if (!r.ok) throw new Error('HTTP ' + r.status); return r.json(); })
+      .then(function (res) {
+        if (!res.ok) { showErr(res.error || 'ошибка'); next = 10000; return; }
+        showErr('');
+        var d = res.data;
+        meter('cpu', d.cpu, cores(d.ncpu));
+        meter('mem', d.mem_total ? 100 * d.mem_used / d.mem_total : 0,
+          'занято ' + size(d.mem_used) + ' из ' + size(d.mem_total) + ' · свободно ' + size(d.mem_total - d.mem_used));
+        meter('disk', d.disk_total ? 100 * (d.disk_total - d.disk_free) / d.disk_total : 0,
+          'свободно ' + size(d.disk_free) + ' из ' + size(d.disk_total));
+      })
+      .catch(function (e) { showErr('Нет связи с панелью: ' + e.message); next = 10000; })
+      .then(function () { busy = false; schedule(next); });
+  }
+  document.addEventListener('visibilitychange', function () {
+    if (document.hidden) clearTimeout(timer); else load();
+  });
+  load();
+
+  var btn = $('speed-btn'), note = $('speed-note');
+  function json(r) { if (!r.ok) throw new Error('HTTP ' + r.status); return r.json(); }
+  function post(path) { return fetch(base + path, {method: 'POST', credentials: 'same-origin'}).then(json); }
+
+  // The browser's round trip to the panel: the first request may pay for a
+  // new connection, so keep the best.
+  function panelPing() {
+    var best = Infinity, left = 4;
+    function one() {
+      var t = performance.now();
+      return fetch('/api/panel/ping', {credentials: 'same-origin', cache: 'no-store'})
+        .then(function (r) { if (!r.ok) throw new Error('HTTP ' + r.status); return r.arrayBuffer(); })
+        .then(function () {
+          best = Math.min(best, performance.now() - t);
+          return --left > 0 ? one() : best;
+        });
+    }
+    return one();
+  }
+  // Keeps the client's download fed until stopped or the panel says the
+  // client has read enough; the pieces grow while they go through quickly.
+  function feed(stop) {
+    var block = new Uint8Array(65536), n = 4;
+    crypto.getRandomValues(block);
+    function one() {
+      var parts = [], t = performance.now();
+      for (var i = 0; i < n; i++) parts.push(block);
+      return fetch(base + '/speed/down', {method: 'POST', body: new Blob(parts), credentials: 'same-origin', signal: stop.signal})
+        .then(function (r) {
+          if (r.status !== 204) return;
+          if (performance.now() - t < 500 && n < 256) n *= 2;
+          return one();
+        });
+    }
+    one().catch(function () {});
+  }
+  // Reads what the client sends and times it from the first byte. It stops by
+  // itself a little after the client's window, so bytes still queued on a slow
+  // link don't hold the result back. st.n is the count so far, for the live
+  // reading.
+  function drain(st, onFirst) {
+    var ac = new AbortController(), last = 0;
+    st.stop = function () { ac.abort(); };
+    function done() { return st.start && last > st.start ? st.n * 8000 / (last - st.start) : 0; }
+    return fetch(base + '/speed/up', {credentials: 'same-origin', cache: 'no-store', signal: ac.signal}).then(function (r) {
+      if (!r.ok) throw new Error('HTTP ' + r.status);
+      var rd = r.body.getReader();
+      function pump() {
+        return rd.read().then(function (c) {
+          if (c.done) return done();
+          last = performance.now();
+          if (!st.start) { st.start = last; setTimeout(st.stop, {{.RelayUpMs}}); onFirst(); }
+          else st.n += c.value.length;
+          return pump();
+        });
+      }
+      return pump();
+    }).catch(function (e) { if (st.start) return done(); throw e; });
+  }
+  // The test through the browser: the client's download is what this page
+  // uploads, and its upload is timed here, where it arrives.
+  function relayTest(st) {
+    return panelPing().then(function (ping) {
+      return post('/speed/relay').then(function (res) {
+        if (!res.ok) return res;
+        var stop = new AbortController();
+        var up = drain(st, function () { stop.abort(); });
+        up.catch(function () {});
+        feed(stop);
+        return post('/speed?relay=1').then(function (res) {
+          stop.abort();
+          // No upload under way by now: none is coming.
+          if (!res.ok || !st.start) { st.stop(); }
+          if (!res.ok) return res;
+          return up.catch(function () { return 0; }).then(function (bps) {
+            res.data.ping_ms += ping;
+            if (bps) res.data.up_bps = bps;
+            return res;
+          });
+        }, function (e) { stop.abort(); st.stop(); throw e; });
+      });
+    });
+  }
+
+  // The live reading: the rate over the last second, from the byte counts the
+  // panel keeps for the running test - or, for the client's upload in a test
+  // through the browser, from what has arrived here.
+  var ARC = 251.4, lv = null;
+  function liveStart(relay, st) {
+    lv = {relay: relay, st: st, phase: '', pts: [], hist: [], busy: false};
+    $('live').hidden = false;
+    liveShow('ping', 0);
+    lv.timer = setInterval(liveTick, 200);
+  }
+  function liveStop() {
+    if (!lv) return;
+    clearInterval(lv.timer);
+    lv = null;
+    $('live').hidden = true;
+  }
+  function liveTick() {
+    var cur = lv;
+    if (cur.relay && cur.st.start) { livePoint(cur, 'up', cur.st.n, performance.now()); return; }
+    if (cur.busy) return;
+    cur.busy = true;
+    fetch(base + '/speed/progress', {credentials: 'same-origin', cache: 'no-store'})
+      .then(json)
+      .then(function (d) {
+        if (cur !== lv || !d.phase || (cur.relay && cur.st.start)) return;
+        livePoint(cur, d.phase, d.phase === 'up' ? d.up : d.down, d.ms);
+      })
+      .catch(function () {})
+      .then(function () { cur.busy = false; });
+  }
+  function livePoint(cur, phase, bytes, ms) {
+    if (phase !== cur.phase) { cur.phase = phase; cur.pts = []; cur.hist = []; }
+    if (phase === 'ping') { liveShow(phase, 0); return; }
+    var pts = cur.pts;
+    pts.push([ms, bytes]);
+    while (pts.length > 2 && ms - pts[0][0] > 1000) pts.shift();
+    if (pts.length < 2 || ms <= pts[0][0]) return;
+    var bps = (bytes - pts[0][1]) * 8000 / (ms - pts[0][0]);
+    cur.hist.push(bps);
+    liveShow(phase, bps, cur);
+  }
+  function liveShow(phase, bps, cur) {
+    var relay = lv && lv.relay, p = rateParts(bps);
+    $('live').className = 'live' + (phase === 'up' ? ' up' : '');
+    $('lv-ico').textContent = phase === 'up' ? '↑' : phase === 'down' ? '↓' : '';
+    $('lv-phase').textContent = phase === 'ping' ? 'Задержка…'
+      : phase === 'up' ? (relay ? 'клиент → браузер' : 'клиент → хост')
+      : (relay ? 'браузер → клиент' : 'хост → клиент');
+    $('lv-num').textContent = phase === 'ping' ? '…' : p[0];
+    $('lv-unit').textContent = phase === 'ping' ? '' : p[1];
+    // A log scale up to 1 Гбит/с, so a slow link moves the needle too.
+    var f = Math.min(1, Math.log(1 + bps / 1e6) / Math.log(1001));
+    $('lv-arc').style.strokeDashoffset = ARC * (1 - f);
+    var h = cur ? cur.hist : [], max = 1.25 * Math.max.apply(null, h.concat(1)), line = '';
+    for (var i = 0; i < h.length; i++) {
+      line += (h.length > 1 ? 100 * i / (h.length - 1) : 0).toFixed(1) + ',' + (98 - 94 * h[i] / max).toFixed(1) + ' ';
+    }
+    $('lv-line').setAttribute('points', line);
+    $('lv-area').setAttribute('points', h.length > 1 ? '0,100 ' + line + '100,100' : '');
+  }
+
+  btn.onclick = function () {
+    var relay = $('speed-relay').checked, st = {n: 0, start: 0, stop: function () {}};
+    btn.disabled = true;
+    note.textContent = 'Идёт замер…';
+    $('speed').hidden = true;
+    liveStart(relay, st);
+    (relay ? relayTest(st) : post('/speed'))
+      .then(function (res) {
+        if (!res.ok) { note.textContent = res.error || 'ошибка'; return; }
+        var d = res.data;
+        $('sp-ping').textContent = d.ping_ms ? d.ping_ms.toFixed(d.ping_ms < 10 ? 1 : 0) + ' мс' : '-';
+        $('sp-down').textContent = rate(d.down_bps);
+        $('sp-up').textContent = d.up_bps ? rate(d.up_bps) : '-';
+        $('sp-down-lbl').textContent = relay ? 'браузер → клиент' : 'хост → клиент';
+        $('sp-up-lbl').textContent = relay ? 'клиент → браузер' : 'клиент → хост';
+        $('speed').hidden = false;
+        note.textContent = d.partial ? 'Замер остановлен по времени - показано то, что успело набраться' : '';
+      })
+      .catch(function (e) { note.textContent = 'Не удалось: ' + e.message; })
+      .then(function () { liveStop(); btn.disabled = false; });
+  };
+})();
+</script>
+</body>
+</html>

internal/server/web/templates/terminal.html

@@ -3,27 +3,63 @@
 <head>
 <meta charset="utf-8">
 <meta name="viewport" content="width=device-width, initial-scale=1">
-<title>Терминал · {{.Agent.Name}} — LPRA</title>
+<title>Терминал · {{.Agent.Name}} - LPRA</title>
 <link rel="stylesheet" href="/static/app.css">
 <link rel="stylesheet" href="/static/xterm.css">
 <style>
   #status.st-ok  { color:#37c871; }
   #status.st-err { color:#ff5c5c; }
+  /* Touch screens: the page is as tall as what the on-screen keyboard leaves,
+     with a row of extra keys at the bottom, the way Termux does it. */
+  .keys { display:none; }
+  body.touch { position:fixed; left:0; right:0; top:0; height:100%; display:flex; flex-direction:column; overflow:hidden; }
+  body.touch .wrap { flex:1; min-height:0; display:flex; width:100%; margin:0; padding:6px; }
+  body.touch #terminal { flex:1; min-width:0; height:auto; }
+  body.touch .keys {
+    display:grid; grid-template-columns:repeat(7, 1fr); gap:4px; flex:none;
+    padding:4px 4px calc(4px + env(safe-area-inset-bottom)); background:var(--panel); border-top:1px solid var(--border);
+  }
+  .keys button {
+    height:38px; padding:0; border:1px solid var(--border); border-radius:6px;
+    background:#0c0f13; color:var(--text); font:500 13px ui-monospace, SFMono-Regular, Menlo, monospace;
+    touch-action:manipulation; user-select:none; -webkit-user-select:none; -webkit-tap-highlight-color:transparent;
+  }
+  .keys button:active { background:var(--border); }
+  .keys button.on { background:var(--accent); border-color:var(--accent); color:#fff; }
+  .keys button.lock { background:var(--accent); border-color:#fff; color:#fff; }
 </style>
 </head>
 <body>
 <header class="topbar">
-  <div class="brand">LPRA · Терминал — {{.Agent.Name}} <span class="muted">({{.Agent.TerminalUser}}@{{.Agent.Hostname}})</span></div>
+  <div class="brand">LPRA · Терминал - {{.Agent.Name}} <span class="muted">({{.Agent.TerminalUser}}@{{.Agent.Hostname}})</span></div>
   <nav>
     <a href="/">← Машины</a>
     <a href="/agents/{{.Agent.ID}}/files">Файлы</a>
     <a href="/agents/{{.Agent.ID}}/forwards">Порты</a>
+    <a href="/agents/{{.Agent.ID}}/status">Статус</a>
+    <a href="/agents/{{.Agent.ID}}/edit">Изменить</a>
     <span id="status" class="muted" style="margin-left:28px">подключение…</span>
   </nav>
 </header>
 <div class="wrap" style="max-width:none">
   <div id="terminal"></div>
 </div>
+<div class="keys" id="keys">
+  <button type="button" data-k="esc">ESC</button>
+  <button type="button" data-k="/">/</button>
+  <button type="button" data-k="-">-</button>
+  <button type="button" data-k="home">HOME</button>
+  <button type="button" data-k="up">↑</button>
+  <button type="button" data-k="end">END</button>
+  <button type="button" data-k="pgup">PGUP</button>
+  <button type="button" data-k="tab">TAB</button>
+  <button type="button" data-k="ctrl" data-mod="ctrl">CTRL</button>
+  <button type="button" data-k="alt" data-mod="alt">ALT</button>
+  <button type="button" data-k="left">←</button>
+  <button type="button" data-k="down">↓</button>
+  <button type="button" data-k="right">→</button>
+  <button type="button" data-k="pgdn">PGDN</button>
+</div>
 
 <script src="/static/xterm.js"></script>
 <script src="/static/addon-fit.js"></script>
@@ -31,11 +67,13 @@
 (function () {
   const agentID = {{.Agent.ID}};
   const statusEl = document.getElementById('status');
+  const touch = window.matchMedia('(pointer: coarse)').matches;
+  if (touch) document.body.classList.add('touch');
   function setStatus(t, cls) { statusEl.textContent = t; statusEl.className = cls || ''; }
 
   const term = new Terminal({
     cursorBlink: true,
-    fontSize: 14,
+    fontSize: touch ? 13 : 14,
     fontFamily: 'ui-monospace, SFMono-Regular, Menlo, monospace',
     theme: { background: '#0c0f13' }
   });
@@ -78,7 +116,7 @@
         setStatus('ошибка открытия (' + r.status + ')', 'st-err');
         term.write('\r\n\x1b[31m[не удалось открыть сессию: HTTP ' + r.status + ']\x1b[0m\r\n');
         if (body) term.write(body.slice(0, 300).replace(/\n/g, '\r\n') + '\r\n');
-        if (r.status === 404) term.write('\x1b[33mМашина не найдена на сервере — возможно, устаревший бинарник сервера без маршрута /open.\x1b[0m\r\n');
+        if (r.status === 404) term.write('\x1b[33mМашина не найдена на сервере - возможно, устаревший бинарник сервера без маршрута /open.\x1b[0m\r\n');
         return;
       }
       const j = await r.json();
@@ -124,17 +162,104 @@
     term.write('\r\n\x1b[33m' + msg + '\x1b[0m\r\n');
   }
 
-  term.onData(function (data) {
+  function send(data) {
     if (closed || !sid) return;
     const bytes = new TextEncoder().encode(data);
     post(base + sid + '/in', { t: 'i', d: bytesToB64(bytes) });
+  }
+  // What the keyboard types gets the CTRL / ALT of the extra keys, if armed.
+  term.onData(function (data) { send(withMods(data)); });
+
+  // --- Extra keys (touch screens) ---
+  // CTRL and ALT: a tap arms the key for the next key press, a long press
+  // keeps it on until tapped again.
+  const mods = { ctrl: 0, alt: 0 }; // 0 off, 1 next key, 2 locked
+  const modBtn = {};
+  document.querySelectorAll('#keys [data-mod]').forEach(function (b) { modBtn[b.dataset.mod] = b; });
+  function showMods() {
+    for (const m in mods) {
+      modBtn[m].classList.toggle('on', mods[m] === 1);
+      modBtn[m].classList.toggle('lock', mods[m] === 2);
+    }
+  }
+  function useMods() {
+    const used = { ctrl: !!mods.ctrl, alt: !!mods.alt };
+    for (const m in mods) if (mods[m] === 1) mods[m] = 0;
+    showMods();
+    return used;
+  }
+  function ctrlChar(c) {
+    if (c === ' ' || c === '@') return '\x00';
+    if (c === '?') return '\x7f';
+    const code = c.toUpperCase().charCodeAt(0);
+    return code >= 64 && code <= 95 ? String.fromCharCode(code & 31) : c;
+  }
+  function withMods(data) {
+    if (!mods.ctrl && !mods.alt) return data;
+    const m = useMods();
+    if (m.ctrl && data.length === 1) data = ctrlChar(data);
+    return m.alt ? '\x1b' + data : data;
+  }
+  // xterm's modifier parameter: 1 + shift(1) + alt(2) + ctrl(4).
+  const CSI = { up: 'A', down: 'B', right: 'C', left: 'D', home: 'H', end: 'F' };
+  const TILDE = { pgup: 5, pgdn: 6 };
+  function keySeq(k) {
+    const m = useMods(), p = 1 + (m.alt ? 2 : 0) + (m.ctrl ? 4 : 0);
+    if (CSI[k]) {
+      if (p > 1) return '\x1b[1;' + p + CSI[k];
+      return (term.modes.applicationCursorKeysMode ? '\x1bO' : '\x1b[') + CSI[k];
+    }
+    if (TILDE[k]) return '\x1b[' + TILDE[k] + (p > 1 ? ';' + p : '') + '~';
+    let s = k === 'esc' ? '\x1b' : k === 'tab' ? '\t' : k;
+    if (m.ctrl && s.length === 1) s = ctrlChar(s);
+    return m.alt ? '\x1b' + s : s;
+  }
+  let press = null;
+  document.querySelectorAll('#keys button').forEach(function (b) {
+    // Keep the focus (and the on-screen keyboard) on the terminal.
+    b.addEventListener('pointerdown', function (e) {
+      e.preventDefault();
+      const mod = b.dataset.mod;
+      if (mod) press = { mod: mod, timer: setTimeout(function () { mods[mod] = 2; press = null; showMods(); }, 450) };
+    });
+    b.addEventListener('pointerup', function (e) {
+      e.preventDefault();
+      const mod = b.dataset.mod;
+      if (mod) {
+        if (press && press.mod === mod) {
+          clearTimeout(press.timer);
+          press = null;
+          mods[mod] = mods[mod] ? 0 : 1;
+          showMods();
+        }
+        return;
+      }
+      send(keySeq(b.dataset.k));
+    });
+    b.addEventListener('pointercancel', function () { if (press) { clearTimeout(press.timer); press = null; } });
+    b.addEventListener('contextmenu', function (e) { e.preventDefault(); });
   });
 
   function sendResize() {
     if (closed || !sid) return;
     post(base + sid + '/in', { t: 'r', cols: term.cols, rows: term.rows });
   }
-  window.addEventListener('resize', function () { fit.fit(); sendResize(); });
+  function refit() {
+    if (touch && window.visualViewport) {
+      // Follow the visible area, so the extra keys sit right above the
+      // on-screen keyboard.
+      const vv = window.visualViewport;
+      document.body.style.top = vv.offsetTop + 'px';
+      document.body.style.height = vv.height + 'px';
+    }
+    fit.fit();
+  }
+  window.addEventListener('resize', refit);
+  if (touch && window.visualViewport) {
+    window.visualViewport.addEventListener('resize', refit);
+    window.visualViewport.addEventListener('scroll', refit);
+  }
+  refit();
   term.onResize(sendResize);
 
   window.addEventListener('pagehide', function () {

internal/tunnel/frame.go

@@ -1,5 +1,5 @@
 // Package tunnel defines the framed multiplexing protocol used for DIRECT port
-// forwarding over the dedicated host port (default 8446). Unlike the HTTP
+// forwarding over the dedicated host port (DefaultPort). Unlike the HTTP
 // long-poll forward, this is a raw TCP stream the agent dials outbound; it
 // carries many concurrent forwarded connections (streams) for one agent and
 // has far lower latency than long-polling.

version.go

@@ -0,0 +1,14 @@
+// Package lpra holds what the server and the agent share at build time.
+package lpra
+
+import (
+	_ "embed"
+	"strings"
+)
+
+//go:embed VERSION.txt
+var versionFile string
+
+// Version is the release version of every binary in this module. VERSION.txt
+// is the only place it is defined.
+var Version = strings.TrimSpace(versionFile)